Re-building the car, so I will start to part out little by little. I have a ton of stuff so keep checking back every 2 weeks or so for more parts. Specially as I pull the motor out.



Phase I
LIST:

- wedge pod 4x 5.5". $75
Can be placed faacing forward between the back of the rear console and an existing sub box. or used for something els. wrapped in suade but I suggest re-wrapping it. do not come with speakers





- Curved pod 6x 6.5" $100
Can be placed in rear of trunk fits snug also fits behind strut or u can use it in your sedan under the windshield. will need to be re-wrapped. do not come with speakers




- Carbon doors $400, fit is great, condition 9.5/10




-03-05 headlights for modding, or spare parts $75 a pair




- 12" box made for a 12W7 $100
sits in spare tire area you can use this as is or as part of your new system. Also have the top section if your interested, will need to be modified/wrapped to fit your aplication





-Bose sub bracket $25


-NX bottle 10lb, never used, wrapped in vynil comes with brackets! $100



-Carbon wrap rings for rear console $30,
remove your grill and put these guys on



-rear console pieces for side projects $20,
This pices and the long plastic piece that sits above it. They have to be repainted or wrapped



-Corbeau 6 point harnesses 3" with chrome buckles. $80 for 2, condition 9/10
-Corbeau FX-1 wide seats, pair $300, biggest seat you can fit in a Z, has custom apolstry that needs to be re-wrapped. has a 1" tear on the passenger one in the side that you cant see.







-12JLW7 with wedge box! $375, works perfect 9/10 box condition.


-Sub box and pods,$100. another stupid box I have, 2x12 has pods go on top, needs re-wrapped

 

reserved

 

interested on the plenum!! price and shipped to tampa FL.

 

PLENUM IS NOT FOR SALE, at this time. might be in the future 2-3months +. and if I did it be atleast $1,500. it has build in custom velocity stacks and hard tubed direct injection nos

 

Pm'd

 

replied all pm's

 

Belts still availible?

 

yes, and I can ship does for $10

 

seats come with sliders

 

good stuff man bump for a gr8 seller cant wait to see whats next

 

How were the belts held??? On a cage bar or with the anchors bolted to bottom of seat?

 

has anchor bolts, also they come with pads

 

What's under that green upholstery? Is it over the original black?

 

In for more pictures of the seats and info about whats under the green. Are these fx1 pro's or the original fx1 ?

 

The apolstry cant be removed since it is glued on. needs to be re apolstered or buy new cushins. These green pieces are on the cushin only, they are velcrowed on. can easilly be re-wrapped in ssuade or whatever. or buy a new set from corbeau for $70.

they come with sliders

these are FX-1 WIDE. FX-1 pro is small version of FX-1. FX-1 wide is larger then FX-1

 

Whats the link for the seat covers from Corbeau?

 

The door panels look like they accept all the stock hardware, is that accurate? Also; how do they attach to the door frame? Thanks.

 

Are the seats still available? Do you know how much it would be for seats and harnesses shipped to 90277. I am very interested in this setup, but am afraid that I may get burned with shipping.

Just to confirm, this seat will fit in the 350 with the stock door panels and same mounting locations?

 

not worth shipping

price drop, seats and harness together $300 picked up

 

Carbon door panels still available?