Looking for suspension help in Ma
#1
Registered User
Thread Starter
iTrader: (12)
Join Date: Jul 2007
Location: Massachusetts
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Looking for suspension help in Ma
I had posted in our Ma meet thread about a possible instal meet. Not much response so I figured I would see if anyone local is willing and has the space, time, and tools to help. I installed some GF210 springs with a friend a couple months ago. I am now getting this popping or cluncking in the front end mostly at lower speeds and most reproducible going over spreed bumps. Also happens when applying the brake sometimes and occasionally when rolling on level ground and turning the wheel quickly like when pulling out of a parking space. Everytime this happens, you also feel it in the pedels.
I also noticed that the springs in the front are not sitting perfectly in the seat. The end of the spring is not all the way in the groove it should be in. I was looking for some help to just reinstal the front springs and give everything else a once over before taking it to a dealer and having to fight with them over suspension parts with lowering springs that may or may not have caused the problem.
Let me know if anyone is willing to help.
I also noticed that the springs in the front are not sitting perfectly in the seat. The end of the spring is not all the way in the groove it should be in. I was looking for some help to just reinstal the front springs and give everything else a once over before taking it to a dealer and having to fight with them over suspension parts with lowering springs that may or may not have caused the problem.
Let me know if anyone is willing to help.
#2
350Z-holic
Join Date: Mar 2007
Location: Interwebz
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
Mike, I am sure some of the weekly meet regulars can help out (usualsuspect). Lets ask around. I have to take my front bumper off to install my clear corners, so I think an install meet is a good idea. Lets see if we can make this happen this week.
See weekly meet thread for details.
See weekly meet thread for details.
Last edited by trodis; 09-15-2008 at 10:08 AM.
#3
Registered User
Thread Starter
iTrader: (12)
Join Date: Jul 2007
Location: Massachusetts
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
I will go back to that thread for now. Just didn't seem like to much interest for it right now. Sorry I have only removed the rear bumper, so not much help on the front.
#4
Registered User
iTrader: (5)
Join Date: May 2008
Location: massachusettes-stationed in tx
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
im game to help you both out w/e as best i can im gunna be busy tomomrow putting my crawford plenum and strutbar in after work but as far as i know im free to help out any other time this week
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM