Alignment and corner balancing
#1
Thread Starter
New Member
iTrader: (15)
Joined: Apr 2007
Posts: 929
Likes: 5
From: Staten Island / NYC
Alignment and corner balancing
Due to the massive amounts of snow falling outside (again), I was reminded that my Z could use an alignment and corner balancing this spring.
So where do you NE guys get your alignments. Specifically, those of you who have camber arms and require specific alignment specs for track use. The local mom and pop shops around me frown upon modified suspensions, and I don't know of any shops around here that are even vaguely familiar with this car, much less aftermarket parts + corner balancing. What shops are good for track setups?
edit: Also, I was looking for a place that can mount difficult R-comps (285/30/18 on a 9" rim)
Keep those Z's off the road when snowing! Thanks!
So where do you NE guys get your alignments. Specifically, those of you who have camber arms and require specific alignment specs for track use. The local mom and pop shops around me frown upon modified suspensions, and I don't know of any shops around here that are even vaguely familiar with this car, much less aftermarket parts + corner balancing. What shops are good for track setups?
edit: Also, I was looking for a place that can mount difficult R-comps (285/30/18 on a 9" rim)
Keep those Z's off the road when snowing! Thanks!
Last edited by INTIMAZY; 02-25-2010 at 07:49 AM.
#2
I think here at R/T Tuning we can take care of ya. we have had plenty of guys come from your area to have us take care of their suspension. We are very familiar with Z setups and can handle the lowest of cars on our rack. Let me know if you are interested in our services
Vince
Vince
#3
I use them ( http://www.ttperformance.net ) for dyno test and suspension balancing but i got a local shop for mounting tires and balancing and wheel alignment that setup my alignment to my liking and have no issues working with my spc camber kit front and rear
Thread
Thread Starter
Forum
Replies
Last Post
DarkCreep
SoCal Marketplace
6
10-17-2015 11:50 PM