Notices
North West Washington, Montana, Oregon, Idaho, Wyoming

FS: Endless 14" 6 pot BBK Front Kit

Thread Tools
 
Search this Thread
 
Old Apr 6, 2006 | 02:07 PM
  #1  
al503's Avatar
al503
Thread Starter
Registered User
iTrader: (4)
 
Joined: Apr 2003
Posts: 258
Likes: 0
From: Portland Oregon
Default FS: Endless 14" 6 pot BBK Front Kit

I'm looking into a new car so...

*This is only the front brakes* Brakes are in great condition. About <1mm wear on the rotors and 1-2mm of wear on the pads. I put a straight edge across the entire rotor (including the part that isn't touched by the pads and there is no ridge or gap.) I've had these for a little over a year now and my driving is almost exclusively highway. (My stock rear brembo pads are down only 2mm total for over 31K miles on the odometer.) That kinda tells you how hard I am on the car. I've had the Endless kit for about 17K miles now.

The rotors are slotted and the calipers are forged for strength and have 6 staggered pistons.

The calipers are custom gold which is a little lighter than the brembo golds. The rotor hat is fairly close to the color of the stock brembos.

The kit comes with stainless lines and an extra set of Endless CC-R racing pads. I got this kit for HPDE's but I never tracked it. The CC-R pads are brand new in the box. I've never tracked the car with these brakes.

I paid $4100 from adam@z1auto with the extra set of pads. There was also an extra charge for Gold calipers back then. I'm looking for $2800 + actual shipping costs (have a UPS account.) *Priced reduced to $2700 shipped with insurance or $2650 local pick up*Insurance is optional but highly recommended. All of the components will be shipped in their original packaging. Postal Money order or Cashier's check from a well-known bank preferred. Paypal is fine if you want to pay the 3%.

Here's a link to the imagestation album:

http://www.imagestation.com/album/pi...?id=2134520251

Here's a link to the endless site with the exact kit:

http://www.endlessusa.com/products/p...044&cid=4&pg=6

I bedded them in properly and I've never heard 1 squeek from them. No shimmy while braking either. They are absolutely solid.

If you're local (Portland Oregon), which I prefer so you can inspect them before purchase, I will even help you install them for a reasonable labor charge.

The new owner will get a lot of

Last edited by al503; Apr 12, 2006 at 01:19 PM.
Reply
Old Apr 6, 2006 | 02:33 PM
  #2  
35ounces's Avatar
35ounces
03 CS Track 6MT
Premier Member
iTrader: (5)
 
Joined: Apr 2003
Posts: 2,841
Likes: 0
From: USA
Default

your links dont work
Reply
Old Apr 6, 2006 | 02:49 PM
  #3  
MurphysZ's Avatar
MurphysZ
Registered User
iTrader: (6)
 
Joined: Aug 2005
Posts: 451
Likes: 1
From: Westminster MD
Default

Originally Posted by 35ounces
your links dont work
Reply
Old Apr 6, 2006 | 03:02 PM
  #4  
al503's Avatar
al503
Thread Starter
Registered User
iTrader: (4)
 
Joined: Apr 2003
Posts: 258
Likes: 0
From: Portland Oregon
Default

both links fixed.

Last edited by al503; Apr 6, 2006 at 03:05 PM.
Reply
Old Apr 7, 2006 | 12:18 AM
  #5  
wa350z's Avatar
wa350z
Registered User
 
Joined: Nov 2004
Posts: 405
Likes: 0
From: Washington
Default

will this fit the 350z
Reply
Old Apr 7, 2006 | 07:12 AM
  #6  
al503's Avatar
al503
Thread Starter
Registered User
iTrader: (4)
 
Joined: Apr 2003
Posts: 258
Likes: 0
From: Portland Oregon
Default

z's with any of the stock 18"s? Absolutely. If you have some funky aftermarket offsets, I couldn't say.

Last edited by al503; Apr 7, 2006 at 07:23 AM.
Reply
Old Apr 12, 2006 | 01:18 PM
  #7  
al503's Avatar
al503
Thread Starter
Registered User
iTrader: (4)
 
Joined: Apr 2003
Posts: 258
Likes: 0
From: Portland Oregon
Default

Price Reduction from $2800 + shipping to $2700 shipped or $2650 local pickup.
Reply
Old Apr 13, 2006 | 07:45 PM
  #8  
al503's Avatar
al503
Thread Starter
Registered User
iTrader: (4)
 
Joined: Apr 2003
Posts: 258
Likes: 0
From: Portland Oregon
Default

Brake kit has been sold
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Exterior & Interior
11
Nov 25, 2021 06:26 AM
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM
MicVelo
NorCal Marketplace
9
Oct 4, 2015 07:55 PM
samansharif
Brakes & Suspension
1
Sep 25, 2015 12:31 PM




All times are GMT -8. The time now is 03:49 AM.