If you got one Alvin, it would sit in the garage with a body kit. just buy one dude

 

Thanks, I been searching around craigslist. I try to find a white one.

 

good luck with looking for a white one. it only came out in 2007, so it's super rare. it's easy to take the frame apart and just have it powdercoated. i'm planning on doing a motor swap next summer (need to save up a bit more) because there are way too many hills in bellevue

 

If it could ride on the Highway, I would buy one.

 

they make body kits for the ruckus?!!! DONE!

 

you can make you ruckus look like this...as long as you have the money. that is Dr. Charles for you old schoolers. he have one of the sickest ruckus that i have seen.

 

so what is going to be your first mod? what typr of swap are you going to do? are you going to do a 2 stroke swap or a 150cc swap? or are you planning to do a big bore on the 150cc? just be prepared to spend a lot of money on the swap. i know i have.

 

^agree, that's one bad *** ruckus. i'll have something similar but not as much cc. i'm thinking of just the stock gy6 swap. 150cc is plenty for me. if i wanna go fast i'll hop in my car. good thing ruckus' are cheap to mod (minus the pw:jdm stuff), lol. my budget is probably around $2k...

 

the GY6 150cc motor and engine mount and wire harness will run you pretty close to $2k. but that is if you find a good price on a motor. for me i have spent about $1500 with GY6, engine mount, and harness. you also might want to purchase a new variator, slider weights, cdi, and new coil. you should be able to pull hard off the line and get pretty good top speed. that is what i suggest to you. you can also do the mod slowly. you don't have to do it all at the same time. oh forgot to mention that i strongly suggest upgrading your front drum brakes to disc brakes. you will definitely need that stopping power.