[Sacramento]: Sacramento Z Owners
Grats mang! that's awesome! Im dropping my mine back off tomorrow to find out what the hell this fluttering sound is and why my car has been acting ****in weird.
as for photoshoot, im busy for pretty much the next 2 weeks, but after that we should be good to go. Hopefully on a non-windy day
as for photoshoot, im busy for pretty much the next 2 weeks, but after that we should be good to go. Hopefully on a non-windy day
We never had that taco tree meet!!!! Lol
It better. It only has 40K miles on it. lol
The difference between the numbers that the Z put out vs. the BMW that originally failed was laughable.
But I did almost shat my pants. They almost launched it off the machine through the garage door. Then homeboy jumped in the car to pull it around to the front while on his cell phone. I may not be going back to Smog-n-Go of Stanford Ranch Road. Unsure though. This is the first time anything like that has happened.
The difference between the numbers that the Z put out vs. the BMW that originally failed was laughable.
But I did almost shat my pants. They almost launched it off the machine through the garage door. Then homeboy jumped in the car to pull it around to the front while on his cell phone. I may not be going back to Smog-n-Go of Stanford Ranch Road. Unsure though. This is the first time anything like that has happened.
My car is low enough to have rubbed COMPLETELY through my flex pipes on my Y-pipe....
guess i need to buy a new one? lol. On a side note, got my install kit today from work for the gears, picking up the gears tomorrow. Awwww yeah!
I went to smog n go on blue ravine in folsom, a buddy of mine works there. They handle nice cars very well.
guess i need to buy a new one? lol. On a side note, got my install kit today from work for the gears, picking up the gears tomorrow. Awwww yeah!I went to smog n go on blue ravine in folsom, a buddy of mine works there. They handle nice cars very well.
My car is low enough to have rubbed COMPLETELY through my flex pipes on my Y-pipe....
guess i need to buy a new one? lol. On a side note, got my install kit today from work for the gears, picking up the gears tomorrow. Awwww yeah!
I went to smog n go on blue ravine in folsom, a buddy of mine works there. They handle nice cars very well.
guess i need to buy a new one? lol. On a side note, got my install kit today from work for the gears, picking up the gears tomorrow. Awwww yeah!I went to smog n go on blue ravine in folsom, a buddy of mine works there. They handle nice cars very well.
Jermy - you should be fine as long as there are no leaks. THe flex section braided section can be almost non existent and still not have a leak. Its whats underneith you have to worry about. Just look for areas of black soot
My car is low enough to have rubbed COMPLETELY through my flex pipes on my Y-pipe....
guess i need to buy a new one? lol. On a side note, got my install kit today from work for the gears, picking up the gears tomorrow. Awwww yeah!
I went to smog n go on blue ravine in folsom, a buddy of mine works there. They handle nice cars very well.
guess i need to buy a new one? lol. On a side note, got my install kit today from work for the gears, picking up the gears tomorrow. Awwww yeah!I went to smog n go on blue ravine in folsom, a buddy of mine works there. They handle nice cars very well.
unfortunately it is leaking... pretty badly lol. I gotta find a new one to replace it with, hopefully something that tucks up higher
are you going to go with a solid one? Maybe have Jordan make one for you?
My Z is finally done, hopefully pick it up tomorrow or Monday... but I still have to do the 60K service and then an alignment before I can daily it again..
My Z is finally done, hopefully pick it up tomorrow or Monday... but I still have to do the 60K service and then an alignment before I can daily it again..

Y not just take it to an exhaust shop and have them weld something up for you? You might be able to source out a flex section for cheap online
Hey junkster, do you still have that steering wheel hub that didnt fit your 510? I ran into an issue after I put a bucket seat in my 280... Also, did you still want the back and inside the mesh of the 92's black?

As for the hub yea i still have it. Turns out that i need a momo type hub which my friend let me borrow, the one that i bought and didnt work is for a nardi i believe.
Well since you have gold already, ill probably do black (if thats alright) so you can have both haha and I thought that Momo and Nardi had the same 6 bolt pattern? I need to mount a quick release so I can get in and out without feeling like Im escaping from an asylum...
Wow apparently Jermy's green wheel thing has taken off big time. Just saw a black 370 with bright green painted stock wheels the other night
in North Natomas. Guess nobody tries to be different anymore.
Last edited by Flyinion; Mar 9, 2012 at 11:12 AM.

Bro, I hate to break it to you but Jermy wasn't the first person to paint his wheels green.
haha yeah. i definitely wasn't the first, but, one of the first around the area with it. Started seeing it pop up all over the places and that kinda **** irritates me. Thats why i'll most likely just be sticking with silver. lol


