FS 2 Kenwood 10s Kenwood Amp Zenclosures Box
I have 2 kenwood 10" subwoofers with a kenwood amp. this comes with a zenclosures box. system sounds great just looking to get $ for more performance parts. its still in the car so you can hear it before you buy it. looking to get $300 obo for everything. all you would need is the amp wires.
KFC-W2511 10" 1000W Subwoofers
* 10" SVC 4-Ohm Subwoofer
* Stainless Steel-Coated Polypropylene Cone with Rubber Surround
* Super Linear Spider
* Double Stacked Magnet
* Extended Pole Piece
* Plastic Decretive Ring x 2
* Reverse Mounting Option
# KAC-7204 2-Channel 1000W Amplifier
* Stereo/Bridgeable Power Amplifier
* 2-Ohm Load Capability
* Front-Mounted Controls
* Line Output Terminals for Extension
* Speaker Level Input
* 1000 Watts Maximum Power
* 500 Watts RMS Power
* Gold Plated Power and Speaker Terminal
* Cast Aluminum Heat Sink
* Single-Side Exposure of Terminals for Multi-Installation
* Power MOSFET Switching Power Supply
* Signal Sensing Turn-On
* Cooling Fan
* Blue Illumination
* Built-in Variable Low-pass Filter and Infrasonic Filter
# SPECIFICATIONS
* Amplifier Class : Class A/B
* Number of Channels : 2-Channel
* Maximum Power : 1800 Watts
* RMS Power Output @ 4 Ohms : 120 Watts x 2-Channel
* RMS Power Output @ 2 Ohms : 250 Watts x 2 Channel
* Bridged Power : 500 Watts x 1-Channel
* THD : 1%
* Signal-to-Noise Ratio (dB) : 100dB
* Frequency Response (Hz) : 20Hz~20kHz
* Built-in Crossover : Yes
* High-Pass Crossover Frequency : 50Hz~200Hz
* Low-Pass Crossover Frequency : 50Hz~200Hz
* Bass Boost : 0dB~18dB
* Bass Remote : N/A
* Fan Cooled : Yes
* Fuse Rating : 40A x 1
* Dimensions (Width x Height x Depth) Inches : 13-3/4" x 2-5/16" x 9-3/8"
* Approximate Weight : 8.4 LBS



KFC-W2511 10" 1000W Subwoofers
* 10" SVC 4-Ohm Subwoofer
* Stainless Steel-Coated Polypropylene Cone with Rubber Surround
* Super Linear Spider
* Double Stacked Magnet
* Extended Pole Piece
* Plastic Decretive Ring x 2
* Reverse Mounting Option
# KAC-7204 2-Channel 1000W Amplifier
* Stereo/Bridgeable Power Amplifier
* 2-Ohm Load Capability
* Front-Mounted Controls
* Line Output Terminals for Extension
* Speaker Level Input
* 1000 Watts Maximum Power
* 500 Watts RMS Power
* Gold Plated Power and Speaker Terminal
* Cast Aluminum Heat Sink
* Single-Side Exposure of Terminals for Multi-Installation
* Power MOSFET Switching Power Supply
* Signal Sensing Turn-On
* Cooling Fan
* Blue Illumination
* Built-in Variable Low-pass Filter and Infrasonic Filter
# SPECIFICATIONS
* Amplifier Class : Class A/B
* Number of Channels : 2-Channel
* Maximum Power : 1800 Watts
* RMS Power Output @ 4 Ohms : 120 Watts x 2-Channel
* RMS Power Output @ 2 Ohms : 250 Watts x 2 Channel
* Bridged Power : 500 Watts x 1-Channel
* THD : 1%
* Signal-to-Noise Ratio (dB) : 100dB
* Frequency Response (Hz) : 20Hz~20kHz
* Built-in Crossover : Yes
* High-Pass Crossover Frequency : 50Hz~200Hz
* Low-Pass Crossover Frequency : 50Hz~200Hz
* Bass Boost : 0dB~18dB
* Bass Remote : N/A
* Fan Cooled : Yes
* Fuse Rating : 40A x 1
* Dimensions (Width x Height x Depth) Inches : 13-3/4" x 2-5/16" x 9-3/8"
* Approximate Weight : 8.4 LBS



Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM




