Little update on SP shop 350z TT

Reply Subscribe

Thread Tools

Search this Thread

Oct 7, 2007 | 09:55 AM

#21

Dynosty

Vendor - Former Vendor

iTrader: (27)

Joined: Jan 2007

Posts: 2,137

Likes: 11

From: Louisville, KY

In for the drag event.

Chris- less time with a camera, more time with a wrench. Get that thing together

Oct 7, 2007 | 04:21 PM

#22

z33boi

Registered User

iTrader: (21)

Joined: Dec 2002

Posts: 486

Likes: 0

From: TN

Quote:

Originally Posted by SaadSindhu

+1 on the clutch. I have the exedy twin disc carbon and its slipping after 5k rpms with 600+ tq. When you guys figure out what clutch you are using let me know. Might need to pick one up too.

if your looking for a new clutch SPEC makes a new super twin clutch. there's 4 different trims and the P trim is good for 1290 tq and its only $1300. checkout their site www.specclutch.com

Oct 7, 2007 | 10:44 PM

#23

unchi

Registered User

iTrader: (7)

Joined: Apr 2007

Posts: 170

Likes: 0

From: So cal

Quote:

Originally Posted by Chris@SP

I'll have to check when I'm back at the shop.

Using same ringlands.

We are using the AEM EMS we manufacture. ( I guess not many know about the setup we make for the 350z. It's a custom wiring harness we manufacture to mate to an AEM 1050 box, along with some internal board changes. It's an entire kit, including sensors, harness, ems, and base map)
This is the same setup we've used on our car when we made 529rwhp on stock block.

Did you mod your cam or just deal with the cams being out of synch randomly?

Oct 7, 2007 | 10:52 PM

#24

Zilvia

Registered User

iTrader: (1)

Joined: Dec 2005

Posts: 4,205

Likes: 0

From: Lima, Ohio

alsong as its a Z event with driving activities on the Weekend ppl will come.

Chris its looking sick....keep us up to date.

Oct 8, 2007 | 12:05 AM

#25

synth19

Registered User

iTrader: (11)

Joined: May 2003

Posts: 4,069

Likes: 0

From: Chicago

Of COURSE the guys @ ChicagoZ would be interested in the event!

Oct 8, 2007 | 08:51 AM

#26

rhythmnsmoke

Registered User

Joined: Dec 2006

Posts: 362

Likes: 0

From: TN

Looking sick!

Oct 8, 2007 | 09:23 AM

#27

SoundPerformance

Sponsor
Sound Performance

Joined: Apr 2006

Posts: 541

Likes: 1

From: Bloomingdale, IL

Quote:

Originally Posted by unchi

Did you mod your cam or just deal with the cams being out of synch randomly?

Cam sync shuts off whenever the cams move.

Oct 8, 2007 | 09:29 AM

#28

Jay'Z

Banned

iTrader: (118)

Joined: Apr 2005

Posts: 10,944

Likes: 1

From: Carbon Fiber, TX

Looks like ur shop is pretty close to me........ hmmmmmmm..

Oct 8, 2007 | 10:12 AM

#29

Chris@SP

Thread Starter

Sponsor
Sound Performance

Joined: Sep 2006

Posts: 301

Likes: 0

From: Bensenville, IL

Quote:

Originally Posted by z33boi

i notice the pic of the RPS clutch, how much power are you guys looking to make? the reason i ask is because i dont think RPS makes a clutch that supports more than 5-650 torque.

The RPS clutch is definitely not intended for full power on our car, we're testing it at lower boost for RPS. It's meant to be about 500-700hp clutch.
For our big power we'll throw in the carbonetics triple for some fun, and try to get it down the track on the 6speed, then we'll throw the 400 in

Chris

Oct 9, 2007 | 07:59 PM

#30

unchi

Registered User

iTrader: (7)

Joined: Apr 2007

Posts: 170

Likes: 0

From: So cal

Quote:

Originally Posted by SoundPerformance

Cam sync shuts off whenever the cams move.

sooooooo that means you cant use the Cam timing>?.....

Oct 9, 2007 | 09:39 PM

#31

cyberkline

Registered User

iTrader: (3)

Joined: Jun 2007

Posts: 144

Likes: 0

From: freeport, Illinois

im up for a meet!

Oct 10, 2007 | 05:32 AM

#32

SoundPerformance

Sponsor
Sound Performance

Joined: Apr 2006

Posts: 541

Likes: 1

From: Bloomingdale, IL

Quote:

Originally Posted by unchi

sooooooo that means you cant use the Cam timing>?.....

No, the variable valve timing still works.

Oct 10, 2007 | 05:53 AM

#33

Audible Mayhem

My350z

iTrader: (48)

Joined: Oct 2005

Posts: 5,165

Likes: 3

From: United States

you know i am down for the event chris, i know three cars that will be there representing 350z drag world very strongly!!

Oct 10, 2007 | 04:23 PM

#34

Chris@SP

Thread Starter

Sponsor
Sound Performance

Joined: Sep 2006

Posts: 301

Likes: 0

From: Bensenville, IL

Consider the meet a done deal then, I'll be starting the planning and picking a date in the next couple of weeks. I konw there are already some major Z events, but whats another

I'll look to put together a Road Race, Drag Race, Dyno Day/Show Shine venue. Sound good

Jeremy, I'm looking forward to it bud!

Chris

Oct 10, 2007 | 04:35 PM

#35

jksstar

New Member

iTrader: (7)

Joined: Jun 2006

Posts: 660

Likes: 11

From: Pensacola FL.

Quote:

Originally Posted by Chris@SP

Consider the meet a done deal then, I'll be starting the planning and picking a date in the next couple of weeks. I konw there are already some major Z events, but whats another

I'll look to put together a Road Race, Drag Race, Dyno Day/Show Shine venue. Sound good

Jeremy, I'm looking forward to it bud!

Chris

keep us updated on the meet, sounds like fun already

Oct 10, 2007 | 05:02 PM

#36

thawk408

Registered User

iTrader: (16)

Joined: Mar 2004

Posts: 2,939

Likes: 0

From: Nashville, TN

I REALLY wish yall would look into making a kit to bolt up the supra Getrag onto the 350z. I would definately be very interested in purchasing that.

Oct 10, 2007 | 07:00 PM

#37

OldManZ350

New Member

iTrader: (23)

Joined: Nov 2003

Posts: 2,429

Likes: 230

From: Florida

good

Last edited by OldManZ350; Oct 23, 2007 at 08:37 AM.

Oct 11, 2007 | 05:19 AM

#38

Chris@SP

Thread Starter

Sponsor
Sound Performance

Joined: Sep 2006

Posts: 301

Likes: 0

From: Bensenville, IL

Quote:

Originally Posted by thawk408

I REALLY wish yall would look into making a kit to bolt up the supra Getrag onto the 350z. I would definately be very interested in purchasing that.

Already thinkin about that

I'll keep you posted

Chris

Oct 11, 2007 | 05:20 AM

#39

Chris@SP

Thread Starter

Sponsor
Sound Performance

Joined: Sep 2006

Posts: 301

Likes: 0

From: Bensenville, IL

Quote:

Originally Posted by TIMROD1011

did you need to use spacers on the front prostar wheels?

We grinded the outside edge of the caliper and the shim tabs and they fit without rubbing. Otherwise if you don't want to grind, you can use a tiny spacer, thats all you'll need.