What have you done for your Z today?
Master
iTrader: (8)
The following users liked this post:
HRMoneyPit (04-24-2016)
New Member
Mine has been doing it for over a month.....but the last time I drove at night was the last time I had this problem. I rarely drive at night but two times in a row is enough to annoy me and figure the problem
New Member
New Member
iTrader: (1)
Thanks fellas.
It'll be a bit before it progresses, but atleast Ive got most the parts in.
New Member
iTrader: (1)
6 inch cawk is my fave!
iTrader: (3)
Managed to get some rear suspension on and new brakes on one side rear... Couldn't get a caliper bolt out on the passenger side and broke my wrench... Almost stripped the bolt with a different approach so I figured I would get back to it a different day...
Picture is about as shitty as my body feels right now.
Picture is about as shitty as my body feels right now.
Master
iTrader: (8)
the bolt to get the caliper bracket off? if so, shorty socket, breaker bar, and dead blow hammer
6 inch cawk is my fave!
iTrader: (3)
Actually the caliper bolt going into the bracket... Also needing a short socket, the 1/4 inch was the only ratchet that would fit and I broke that bastard in half... Probably a good thing though, I feel like I got ran over..
Just checked my basement and found my 6 point 14mm so ill get too it with that later this week.
Just checked my basement and found my 6 point 14mm so ill get too it with that later this week.
Last edited by dboyzalter; 04-25-2016 at 03:13 PM.
New Member
Thanks Shawn! The pics are just what I wanted to see.
New Member
iTrader: (1)
I did my doors myself re-holstering over the winter, its not hard to make the seats yourself, you can find a howto on this forum
But sometimes, TIME = MONEY
Waiting on this one now with red-stitches.
I will get real carbon this fall/winter, Vinyl works but ye, the real deal looks better.
Last edited by Gotserved; 04-27-2016 at 01:12 PM.
6 inch cawk is my fave!
iTrader: (3)
Got the rest of the brakes on... Feel like I dropped the car on me, but I didn't...
Special note when you paint your wheels avoid spraying brake cleaner on them
New Member
You have been having such a problem changing brakes. Last time didn't you say you got hit by a car....after doing one side lol