Orlando Z owners
Originally Posted by Juno
Chucky - Where is Amazon Village?
Matt - let me know if you get your car tuned and I'll come out after work.
Matt - let me know if you get your car tuned and I'll come out after work.
Originally Posted by Chucky
It's right down the street from Boardwalk Bowl on 50. It used to be the Builder's Square. If you are heading west on 50 from Alafaya Trail it will be on the left hand side. If you pass Boardwalk Bowl, you have gone too far. There is a Krystal Burger next to it.
Hmm...I know where I'm eating on the way over there!!
I'm coming from Brevard, and mapquest told me to take 520 to 50 for Boardwalk Bowl. Is that the right direction for this other place?
Originally Posted by Juno
Hmm...I know where I'm eating on the way over there!!
I'm coming from Brevard, and mapquest told me to take 520 to 50 for Boardwalk Bowl. Is that the right direction for this other place?
I'm coming from Brevard, and mapquest told me to take 520 to 50 for Boardwalk Bowl. Is that the right direction for this other place?
You slide them in and you side them right out...
Remind me to never go to Krystal with you! LOL 
Originally Posted by Juno
Hmm...I know where I'm eating on the way over there!!
I'm coming from Brevard, and mapquest told me to take 520 to 50 for Boardwalk Bowl. Is that the right direction for this other place?
I'm coming from Brevard, and mapquest told me to take 520 to 50 for Boardwalk Bowl. Is that the right direction for this other place?
Registered User
iTrader: (4)
Joined: Mar 2005
Posts: 2,880
Likes: 3
From: EveryWhere & yet... NoWhere
Hey I saw a G on I4 the other day... Red with some nice rims and a bodykit I did not recognize. I did not recognize the guy, but there were 2 good looking girls in there... Lucky bugger, has a nice looking car and 2 fine women... I really need to move down here
Registered User
Joined: Jul 2003
Posts: 617
Likes: 0
From: Orlando Fl
Originally Posted by NC Z Luva
Wow all these Z & G owners on here. I just got back from Orlando and saw a total of 3 Z's and 1 G35. Only one was modded. I was there for a whole week. Where were all you guys?
Lou
Originally Posted by BamBam
Hey I saw a G on I4 the other day... Red with some nice rims and a bodykit I did not recognize. I did not recognize the guy, but there were 2 good looking girls in there... Lucky bugger, has a nice looking car and 2 fine women... I really need to move down here
Originally Posted by rich harris
C-Los the fat guy lost his $100.00 you missed it i lmao
post the vid and pic man can't wait to hear the beast...
post the vid and pic man can't wait to hear the beast... oh Lord......he had it comin...shYt i wish I could've seen that.....DAMN...video of THAT would've been GREAT...im in Louisiana right now
...will be here till thursday...ill post things up when I get back to my computa'.
i have a perdicament....im trading in my Z right....but .im unsure what to get..i really llike the roadster but im afraid of its track performance compared to a coupe. Rigity and weight are biggest concerns. However i do want all perks that i didnt have in my base such as nav etc. My base 04 actually spanked 05s and higher end models at pocono due to mostly weight...and i dont even have a lsd. I pull harder ...out of a exit all the time ..i even spanked revups. But im tired of the none leather none nav none homelink none brembo days ya knw....whats my bet medium to get.. btw color is chosen going with smoke.
Registered User
Joined: May 2006
Posts: 131
Likes: 0
From: Charlotte, NC
Originally Posted by Harry R
were are we? we are like the win all over! we will be at a show on the 26th of august. you are more then welcome to come out.
Lou
Lou
Wish I could Lou, but I'm back in Charlotte now. I'm really considering moving to Orlando though.
Confused!
I have an issue, dont know what the problem is. I am painting the interior molding parts for my car. I started small. Here is where the problem lies. I pulled the gear shift **** off and removed the plastic part for the manual tranmission. I didnt unconnect the climate control, I just unclipped it from the plastic molding. After painting the part which looks **** UP by the way, I reinstalled the part back to its original location. Here is the problem. Last night I was going to go the movies. I noticed that my heater was on full blast. I went to turn it off and turn on the AC and i noticed the controls did nothing. My climate controls dont work anymore. I dont know why. I was very gentle removing them from the molding piece. I was gentle putting them back in. There should be no reason why this does not work. The only other thing that I have done is remove the black pieces where the mirror is with the high's for the radio and the black piece where the air vents are on the door and the pieces that have the Z emblem in the molding where the door Jam is that allows air into the doors. This should have nothing to do with the issue, I am guessing but anything is up for debate at the moment. I am going to dissconnect the battery and see if it resets the system.
Like I said, the fan and heater are working fine, just the climate control guages stopped working.
HELP ME!!!!!!!!!!!
I have an issue, dont know what the problem is. I am painting the interior molding parts for my car. I started small. Here is where the problem lies. I pulled the gear shift **** off and removed the plastic part for the manual tranmission. I didnt unconnect the climate control, I just unclipped it from the plastic molding. After painting the part which looks **** UP by the way, I reinstalled the part back to its original location. Here is the problem. Last night I was going to go the movies. I noticed that my heater was on full blast. I went to turn it off and turn on the AC and i noticed the controls did nothing. My climate controls dont work anymore. I dont know why. I was very gentle removing them from the molding piece. I was gentle putting them back in. There should be no reason why this does not work. The only other thing that I have done is remove the black pieces where the mirror is with the high's for the radio and the black piece where the air vents are on the door and the pieces that have the Z emblem in the molding where the door Jam is that allows air into the doors. This should have nothing to do with the issue, I am guessing but anything is up for debate at the moment. I am going to dissconnect the battery and see if it resets the system.
Like I said, the fan and heater are working fine, just the climate control guages stopped working.
HELP ME!!!!!!!!!!!
Originally Posted by nosurf2day
Confused!
I have an issue, dont know what the problem is. I am painting the interior molding parts for my car. I started small. Here is where the problem lies. I pulled the gear shift **** off and removed the plastic part for the manual tranmission. I didnt unconnect the climate control, I just unclipped it from the plastic molding. After painting the part which looks **** UP by the way, I reinstalled the part back to its original location. Here is the problem. Last night I was going to go the movies. I noticed that my heater was on full blast. I went to turn it off and turn on the AC and i noticed the controls did nothing. My climate controls dont work anymore. I dont know why. I was very gentle removing them from the molding piece. I was gentle putting them back in. There should be no reason why this does not work. The only other thing that I have done is remove the black pieces where the mirror is with the high's for the radio and the black piece where the air vents are on the door and the pieces that have the Z emblem in the molding where the door Jam is that allows air into the doors. This should have nothing to do with the issue, I am guessing but anything is up for debate at the moment. I am going to dissconnect the battery and see if it resets the system.
Like I said, the fan and heater are working fine, just the climate control guages stopped working.
HELP ME!!!!!!!!!!!
I have an issue, dont know what the problem is. I am painting the interior molding parts for my car. I started small. Here is where the problem lies. I pulled the gear shift **** off and removed the plastic part for the manual tranmission. I didnt unconnect the climate control, I just unclipped it from the plastic molding. After painting the part which looks **** UP by the way, I reinstalled the part back to its original location. Here is the problem. Last night I was going to go the movies. I noticed that my heater was on full blast. I went to turn it off and turn on the AC and i noticed the controls did nothing. My climate controls dont work anymore. I dont know why. I was very gentle removing them from the molding piece. I was gentle putting them back in. There should be no reason why this does not work. The only other thing that I have done is remove the black pieces where the mirror is with the high's for the radio and the black piece where the air vents are on the door and the pieces that have the Z emblem in the molding where the door Jam is that allows air into the doors. This should have nothing to do with the issue, I am guessing but anything is up for debate at the moment. I am going to dissconnect the battery and see if it resets the system.
Like I said, the fan and heater are working fine, just the climate control guages stopped working.
HELP ME!!!!!!!!!!!
Originally Posted by nosurf2day
Confused!
I have an issue, dont know what the problem is. I am painting the interior molding parts for my car. I started small. Here is where the problem lies. I pulled the gear shift **** off and removed the plastic part for the manual tranmission. I didnt unconnect the climate control, I just unclipped it from the plastic molding. After painting the part which looks **** UP by the way, I reinstalled the part back to its original location. Here is the problem. Last night I was going to go the movies. I noticed that my heater was on full blast. I went to turn it off and turn on the AC and i noticed the controls did nothing. My climate controls dont work anymore. I dont know why. I was very gentle removing them from the molding piece. I was gentle putting them back in. There should be no reason why this does not work. The only other thing that I have done is remove the black pieces where the mirror is with the high's for the radio and the black piece where the air vents are on the door and the pieces that have the Z emblem in the molding where the door Jam is that allows air into the doors. This should have nothing to do with the issue, I am guessing but anything is up for debate at the moment. I am going to dissconnect the battery and see if it resets the system.
Like I said, the fan and heater are working fine, just the climate control guages stopped working.
HELP ME!!!!!!!!!!!
I have an issue, dont know what the problem is. I am painting the interior molding parts for my car. I started small. Here is where the problem lies. I pulled the gear shift **** off and removed the plastic part for the manual tranmission. I didnt unconnect the climate control, I just unclipped it from the plastic molding. After painting the part which looks **** UP by the way, I reinstalled the part back to its original location. Here is the problem. Last night I was going to go the movies. I noticed that my heater was on full blast. I went to turn it off and turn on the AC and i noticed the controls did nothing. My climate controls dont work anymore. I dont know why. I was very gentle removing them from the molding piece. I was gentle putting them back in. There should be no reason why this does not work. The only other thing that I have done is remove the black pieces where the mirror is with the high's for the radio and the black piece where the air vents are on the door and the pieces that have the Z emblem in the molding where the door Jam is that allows air into the doors. This should have nothing to do with the issue, I am guessing but anything is up for debate at the moment. I am going to dissconnect the battery and see if it resets the system.
Like I said, the fan and heater are working fine, just the climate control guages stopped working.
HELP ME!!!!!!!!!!!
There is a WHITE clip in the back of the AC controls, I would Check it to see that it is positioned in the right way. If it is, diconnect it and then re connect it.. I had a simular problem, when I put my radio in.
Originally Posted by pesci
There is a WHITE clip in the back of the AC controls, I would Check it to see that it is positioned in the right way. If it is, diconnect it and then re connect it.. I had a simular problem, when I put my radio in.
