Orlando Z owners
Californication on the 28th.... for almost 10 freakin days. My car will be in a secret location....
P.S.
Juan...i cant think of anything you'd be useful for "late night"..maybe chucky or Gilley r interested in your services...
P.S.
Juan...i cant think of anything you'd be useful for "late night"..maybe chucky or Gilley r interested in your services...
Originally Posted by manny007
Next meet will be on Saturday the 28th @ Sonics on I-drive
Hey guys... bad news, I got into an accident on Sunday early morning. The roads were wet and I shifted into 3rd at too high of an rpm, lost control of the car (I have no LSD), did a 720, went over a curb/sidewalk embankment and ended up in a little ditch. I almost flipped, I was wearing my seat belt and was very lucky that I didnt hit anything, as I just landed in wet muddy grass. The car isnt tooo bad. But the 4 splash guards ripped off, rear bumper is damaged and scratched, upper and lower rear control arms are bent. Rims scratched, almost all of them. Front two tires are flat. Front bumper is not completly flush to right side headlight. And needs new axle, as cv boot ripped on right drivers side.
I need the following parts:
1. 06 Rear Bumper (dont think i can use previous models right?)
2. Front/Rear splash guards.
3. Rear drivers side axle
4. Upper/Lower Control Arms (Rear drivers side, black pieces)
5. Wheels...if anyone has any for sale...
6. Aftermarket Exhaust
7. LSD
I need the following parts:
1. 06 Rear Bumper (dont think i can use previous models right?)
2. Front/Rear splash guards.
3. Rear drivers side axle
4. Upper/Lower Control Arms (Rear drivers side, black pieces)
5. Wheels...if anyone has any for sale...
6. Aftermarket Exhaust
7. LSD
Last edited by ZLadie2000; Jul 25, 2007 at 12:13 AM.
Originally Posted by ZLadie2000
Hey guys... bad news, I got into an accident on Sunday early morning. The roads were wet and I shifted into 3rd at too high of an rpm, lost control of the car (I have no LSD), did a 720, went over a curb/sidewalk embankment and ended up in a little ditch. I almost flipped, I was wearing my seat belt and was very lucky that I didnt hit anything, as I just landed in wet muddy grass. The car isnt tooo bad. But the 4 splash guards ripped off, rear bumper is damaged and scratched, upper and lower rear control arms are bent. Rims scratched, almost all of them. Front two tires are flat. Front bumper is not completly flush to right side headlight. And needs new axle, as cv boot ripped on right drivers side.
I need the following parts:
1. 06 Rear Bumper (dont think i can use previous models right?)
2. Front/Rear splash guards.
3. Rear drivers side axle
4. Upper/Lower Control Arms (Rear drivers side, black pieces)
5. Wheels...if anyone has any for sale...
I need the following parts:
1. 06 Rear Bumper (dont think i can use previous models right?)
2. Front/Rear splash guards.
3. Rear drivers side axle
4. Upper/Lower Control Arms (Rear drivers side, black pieces)
5. Wheels...if anyone has any for sale...
holla. lol
Priscilla: Quito has all 4 of my splash guards but they are '04. I'm not sure if they'll fit but you can try. If they do fit you can keep them. I had them on my car for about 1-2 months before going with the side skirts. I'm glad you are ok!
Juan
Juan
Anyone want a used 350z NISMO exhaust with about 5k miles for $700? I'd rather not ship it... It just came off my ex-gf's car and it still looks brand new with no scratches.
+2 on the being okay, dang accidents are happening too much these days.
I took the car to the shop yesterday, 3 weeks and she should be looking beautiful again. I cant wait
I took the car to the shop yesterday, 3 weeks and she should be looking beautiful again. I cant wait
glad your ok, you might want to add an lsd to your parts list too.
btw does anyone know how to remove the conical bushing on the upper control arm? I am trying to install my spc front arms and i cant get the damn thing off even with a puller.
refer to here, its Giley's write up : https://my350z.com/forum/showthread....ht=control+arm
btw does anyone know how to remove the conical bushing on the upper control arm? I am trying to install my spc front arms and i cant get the damn thing off even with a puller.
refer to here, its Giley's write up : https://my350z.com/forum/showthread....ht=control+arm
Originally Posted by ZLadie2000
Hey guys... bad news, I got into an accident on Sunday early morning. The roads were wet and I shifted into 3rd at too high of an rpm, lost control of the car (I have no LSD), did a 720, went over a curb/sidewalk embankment and ended up in a little ditch. I almost flipped, I was wearing my seat belt
Sorry to here of this accident Persilla, but I'm glad to here that ur OK and that you were wearing ur seatbelt...Good luck on getting ur car back to shape...




Glad you're ok, Priscilla! Be careful out there! And sorry to hear about your Z.