Albuquerque and Santa Fe
#201
Registered User
Join Date: May 2008
Location: LINY, currently Socorro NM.
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
any meets soon? im here for another few weeks before i go back home for the summer, unfortunately my cars gonna be in the shop for a few days after someone broke in, stole my radio, and caused close to 10,000 worth of damage to my interior... should be back on the road soon. definately cant wait to meet up! i think theres a few ppl on g35driver that are in alb too, we definately gotta get something set up!
#202
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: ABQ
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Price is $2600
I'm going to give the local community about 2 weeks to jump on these before I offer up for shipping. These were on a 03 G35 coupe and look AMAZZZZZIIIIINNNNNGGGGG!!!!
The bling factor from these cannot be described in words. These are the perfect offset for a flush look on the G35, its so flush that if you have your car lowered, you will have to roll your fenders. I did not have my car lowered and did not have a rubbing issue.
Here are the details and then the picks, I had them on for 3 months starting in Feb and parted the car out for a trade. I had planned on putting these on the new car, but they are too wide and the wrong offset.
The fronts are 19x9.5 with 17 offset (approx 4" lip)
The rears are 19x10.5 with 18 offset (approx 5" lip)
The tires are in EXCELLENT condition. I only ran these tires in the summer and put my stockers back on when the weather got cold. T
The fronts are Toyo T1Rs and 245/35/19 with approx 5K miles on them (easily last another season).
The rears are Toyo T1Rs ad 275/35/19 with approx 500 miles on them (easily go two seasons, mounted new in Feb to the rims).
I'm sure these will fit more cars than the G35 as it shares a common lug pattern of 114.3x5 but you'll have to double check the offsets if you want to purchase, don't ask me about any fit but the G35. Also, this did clear the brembo package.
On a scale of 10, all rims are a 9 of 10 with small scratches of slight scuffs. The pricing reflects this don't ask for a lower price because of this. It doesn't come across in the pics, you have to absolutely be on top of it to see the defects and its not going to come through with a picture.
If you'd like to see in person, call 505-449-7858 (Don) and we can arrange a meeting for you to look. On to the pics!!
I'm going to give the local community about 2 weeks to jump on these before I offer up for shipping. These were on a 03 G35 coupe and look AMAZZZZZIIIIINNNNNGGGGG!!!!
The bling factor from these cannot be described in words. These are the perfect offset for a flush look on the G35, its so flush that if you have your car lowered, you will have to roll your fenders. I did not have my car lowered and did not have a rubbing issue.
Here are the details and then the picks, I had them on for 3 months starting in Feb and parted the car out for a trade. I had planned on putting these on the new car, but they are too wide and the wrong offset.
The fronts are 19x9.5 with 17 offset (approx 4" lip)
The rears are 19x10.5 with 18 offset (approx 5" lip)
The tires are in EXCELLENT condition. I only ran these tires in the summer and put my stockers back on when the weather got cold. T
The fronts are Toyo T1Rs and 245/35/19 with approx 5K miles on them (easily last another season).
The rears are Toyo T1Rs ad 275/35/19 with approx 500 miles on them (easily go two seasons, mounted new in Feb to the rims).
I'm sure these will fit more cars than the G35 as it shares a common lug pattern of 114.3x5 but you'll have to double check the offsets if you want to purchase, don't ask me about any fit but the G35. Also, this did clear the brembo package.
On a scale of 10, all rims are a 9 of 10 with small scratches of slight scuffs. The pricing reflects this don't ask for a lower price because of this. It doesn't come across in the pics, you have to absolutely be on top of it to see the defects and its not going to come through with a picture.
If you'd like to see in person, call 505-449-7858 (Don) and we can arrange a meeting for you to look. On to the pics!!
#206
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: ABQ
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Wow, I feel for you Jason that is just plain sh*** luck. I hope the shop that allowed this to happen comes up with a reasonable solution for you. Looks like it needs a new front clip at a minimum and replacement of all the aftermarket parts/motor that may be damaged. Just curious, as I never saw it mentioned, what was the shop that let this happen?
If you don't want to say the name, just tell us the cross streets. GL.
Don
If you don't want to say the name, just tell us the cross streets. GL.
Don
#209
New Member
iTrader: (19)
Join Date: Jul 2005
Location: new mexico
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
wow.. im without words.. thats too bad.. i would be sooo pissed.. hopefully everything gets taken care of.. 2nd on letting us know what shop this was. even if it was a freak one time accident i would rather not take a chance.. if the kid driving it wasnt capable of handling a car that fast in a parking lot he should not have touched it. i find it hard to believe that much damage was done just by hitting a curb pulling around a parking lot.. sounds like there is a little more to the story.. just my .02
#213
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: ABQ
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Go here. Its much bigger locally and they host the events you'd probably be interested in. Lot of Nissan guys/gals as well.
http://www.racingsouthwest.com/
http://www.racingsouthwest.com/
#214
Registered User
iTrader: (6)
Join Date: Aug 2008
Location: They rapin everybody out here!
Posts: 485
Likes: 0
Received 1 Like
on
1 Post
I've still never signed up for RSW lol. ISF eh?? I have to drive by some time and check it out, they're just beautiful. Welcome to Albuquerque island03z, I drive the white 08 ppw on bronze nismo wheels. Just wave when you see me around
#220
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: ABQ
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Never had to do one thankfully, I've read through the procedures though and its a time consuming issue, believe the whole window needs to come out. Search around the forum, you'll find the maintenance manuals and be able to see all that is involved. GL.