So Cal Dyno Day???
Thread Starter
MOTORDYNE-MY350Z SPONSOR
iTrader: (53)
Joined: Jul 2004
Posts: 4,399
Likes: 9
From: L.A. California
Anybody interested in a dyno day at Church Automotive (Torrance/Wilmington area) or Strictly Dyno (SFV)?
Church Automotive will typically do groups of 10+ at $50 for 3 pulls with A/F measurements. They have a very accurate/repeatable Dynapac dyno.
I don't know the details on Strictly Dyno but its an option I could check out.
Church Automotive will typically do groups of 10+ at $50 for 3 pulls with A/F measurements. They have a very accurate/repeatable Dynapac dyno.
I don't know the details on Strictly Dyno but its an option I could check out.
Someone suggested a dyno day in July.
https://my350z.com/forum/southern-california/124693-dyno-day-in-july.html
Dont know if thats still going on, but Im in for a mid/late July dyno day.
https://my350z.com/forum/southern-california/124693-dyno-day-in-july.html
Dont know if thats still going on, but Im in for a mid/late July dyno day.
Originally Posted by Hydrazine
I don't know the details on Strictly Dyno but its an option I could check out.
1) kamz
2) zxsaint (July)
I can afford fifty bucks....want to get a somewhat baseline of my ride, before I add any more mods....I'll get my boy also, SBCbaseball, his Z is sick.....I think the cleanest looking one at the Stillen Z owner appreciation day a few weeks back!!! Torrance/Wilmas area is close to me...LBCin Ya...
Trending Topics
Originally Posted by UCLAzzz
I can afford fifty bucks....want to get a somewhat baseline of my ride, before I add any more mods....I'll get my boy also, SBCbaseball, his Z is sick.....I think the cleanest looking one at the Stillen Z owner appreciation day a few weeks back!!! Torrance/Wilmas area is close to me...LBCin Ya...
With your popcharger and exhaust I can already tell you that you will throw down ~245hp on a dynojet, if your car is a 6mt anyway.
Its amazing how many bolt ons you can add to these motors and make next to nothing in power with them. Ive seen guys with $2-3k in bolt ons and software making only about 20hp over stock on the dyno.....needless to say, they were pretty dissapointed.
If you want big power, go FI. Its expensive but ultimately WAY cheaper than making "all motor" power.
If anyone is interested, the guys over at ClubLexus are trying to set up a dyno day set up at a place in Carson for 7/10, $40 for 3 runs.
http://www.clublexus.com/forums/showthread.php?t=166834
http://www.clublexus.com/forums/showthread.php?t=166834
Thread Starter
MOTORDYNE-MY350Z SPONSOR
iTrader: (53)
Joined: Jul 2004
Posts: 4,399
Likes: 9
From: L.A. California
Originally Posted by Rickdogg
I tried to set one up a while back, but there was mediocre interest 
Mabey our luck will be different this time. I hope.
Well at least we have a group of people over on the G35DRIVER board who are also interested. Some signed on and some are interested. I posted this same thread over there and the general concensus is looking like Church Automotive with their new Dynapac machines.
I gotta admit I am biased towards Church auto. The owner Shawn doesn't need coaching on how to do a controlled dyno. And the dyna pacs require removal of the wheels so we will get better comparative results on engine to engine. ...So you won't need to put on your stock wheels/tires to run to the dyno.
July 9 or 16th? any preference?
Who's interested? Please put your name on the list.
1) kamz
2) zxsaint (July)
3) Hydrazine
4) Dsskyline
There are others on the G board who will sign on once the list starts getting bigger.
July 9 or 16th? any preference?[/b]
Who's interested? Please put your name on the list.
1) kamz (Juy 9th)
2) zxsaint (July)
3) Hydrazine
4) Dsskyline
How much is it if I just go in?
Who's interested? Please put your name on the list.
1) kamz (Juy 9th)
2) zxsaint (July)
3) Hydrazine
4) Dsskyline
How much is it if I just go in?
Thread Starter
MOTORDYNE-MY350Z SPONSOR
iTrader: (53)
Joined: Jul 2004
Posts: 4,399
Likes: 9
From: L.A. California
Singles are about $100 but you won't have to worry about being the only one. I'm going for sure. I got various different mods to test.
BTW anybody here with a 05 6MT track edition? I'll hook you up with a free plenum spacer if you can get it dynoed on the new lower plenum.
BTW anybody here with a 05 6MT track edition? I'll hook you up with a free plenum spacer if you can get it dynoed on the new lower plenum.
1) kamz (July 9th)
2) zxsaint (July)
3) Hydrazine
4) Dsskyline
5) Sr. Panza
6) XBS
7) vkzawa (9th is the Z meet BBQ, 16th is better for me)
8) L337350
9) Phatmitzu (16th)
10) Mr_Q(when ever, watching thread for day)
2) zxsaint (July)
3) Hydrazine
4) Dsskyline
5) Sr. Panza
6) XBS
7) vkzawa (9th is the Z meet BBQ, 16th is better for me)
8) L337350
9) Phatmitzu (16th)
10) Mr_Q(when ever, watching thread for day)
1) kamz
2) zxsaint (July)
3) Hydrazine
4) Dsskyline
5) Sr. Panza
6) XBS
7) vkzawa (9th is the Z meet BBQ, 16th is better for me)
8) L337350
9) Phatmitzu (16th)
10) Mr_Q(when ever, watching thread for day)[/QUOTE]
That's 10!!!! Looks like the 16th is the preferred date.
2) zxsaint (July)
3) Hydrazine
4) Dsskyline
5) Sr. Panza
6) XBS
7) vkzawa (9th is the Z meet BBQ, 16th is better for me)
8) L337350
9) Phatmitzu (16th)
10) Mr_Q(when ever, watching thread for day)[/QUOTE]
That's 10!!!! Looks like the 16th is the preferred date.



