FS: PRO prepped and painted INGs replica kit!
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: Sherman Oaks, CA.
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
FS: PRO prepped and painted INGs replica kit!
Local pick up only, will meet at agreed location.
I am getting ready to track prep my car and I need to reapproach certain aspects of the car. The body kit has to go.
It has been painstakingly prefitted, painted, and then professionally installed by M.O.B. Works of Orange, CA. The color is black. This kit will bolt right up to your 350z with very little else to do.
It is a strong FPR kit. (note this means Fiber Reinforced Plastic) It's a combo of fiberglass with a plastic based reinforcement compond on the outside. It can take one heck of a hit. (see condition notes)
Some small chips on the front from road pepples. Only a few here and there. If it really is a bother you could have it repainted. Of course if you need a color other than black, this will get resolved anyway. But it still looks new and repaint is uneeded, I think.
The underside, out of view, of the front lip took a huge hit from a classic SOCAL pot hole. BUT all it did was leave grooves and a small chip. Was very impressed with the strength of the kit. The kit did not crack!
The lower lip, underneath once again, has all the usual scrapes from narrow approaches. You get them as soon as you leave the paint shop! If your car is lowered you run a greater risk of hitting things, obviously.
I am placing this ad here first, but if no one is interested, off to EBAY it goes. My starting bid will be $50 more than the offer here.
I am getting ready to track prep my car and I need to reapproach certain aspects of the car. The body kit has to go.
It has been painstakingly prefitted, painted, and then professionally installed by M.O.B. Works of Orange, CA. The color is black. This kit will bolt right up to your 350z with very little else to do.
It is a strong FPR kit. (note this means Fiber Reinforced Plastic) It's a combo of fiberglass with a plastic based reinforcement compond on the outside. It can take one heck of a hit. (see condition notes)
CONDITION:
(generally does not really look any different from the pics)
(generally does not really look any different from the pics)
Some small chips on the front from road pepples. Only a few here and there. If it really is a bother you could have it repainted. Of course if you need a color other than black, this will get resolved anyway. But it still looks new and repaint is uneeded, I think.
The underside, out of view, of the front lip took a huge hit from a classic SOCAL pot hole. BUT all it did was leave grooves and a small chip. Was very impressed with the strength of the kit. The kit did not crack!
The lower lip, underneath once again, has all the usual scrapes from narrow approaches. You get them as soon as you leave the paint shop! If your car is lowered you run a greater risk of hitting things, obviously.
I am placing this ad here first, but if no one is interested, off to EBAY it goes. My starting bid will be $50 more than the offer here.
I paid around $2000 for the kit AND the awesome prep-paint-install from M.O.B. Works.
Now you can get the deal of the year for $800!!!Please PM or respond here, thank you.
Last edited by Mr_Q; 07-11-2006 at 06:50 PM.
#6
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: Sherman Oaks, CA.
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
**update**
I realize some might want to come look before they buy, well I can't really do that. Everytime I load the kit in to my Jeep I risk adding scratches, etc and it's a real pain. And frankly I don't want peeps--I don't know from Jack --hanging at my pad.
SO...
I've taken a slew of shots of the kit so you can be sure if you decide you want the kit. Serious buyers only. Remember, replica or not, for $800 it's a fine deal.
There are a couple scratches on the kit that need to be buffed out, maybe wet sanded. The scratches did not get in to the primer. So you could still mount this right to your black 350z and not look like a tool. If you are painting a different color, then at least you have a good base coat down already.
Here is the link for the updated pics. Some parts of the kit wasn't exactly clean so you are going to see swirls and dirt on some areas. It's a PITA taking decent pics of black painted parts!
SO...
I've taken a slew of shots of the kit so you can be sure if you decide you want the kit. Serious buyers only. Remember, replica or not, for $800 it's a fine deal.
There are a couple scratches on the kit that need to be buffed out, maybe wet sanded. The scratches did not get in to the primer. So you could still mount this right to your black 350z and not look like a tool. If you are painting a different color, then at least you have a good base coat down already.
Here is the link for the updated pics. Some parts of the kit wasn't exactly clean so you are going to see swirls and dirt on some areas. It's a PITA taking decent pics of black painted parts!
Last edited by Mr_Q; 07-13-2006 at 08:24 PM.
Trending Topics
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: Sherman Oaks, CA.
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I haven't hit the boards sooner.
Right now the kit is SOLD. EL Guy had "seconds" on it and is supposed to be picking it up today.
If anything changes I will post here.
Thank you.
Right now the kit is SOLD. EL Guy had "seconds" on it and is supposed to be picking it up today.
If anything changes I will post here.
Thank you.
#17
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2004
Location: Sherman Oaks, CA.
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
EL was supposed to pick it up today, I left two messages and never heard back. Not sure if he's still interested now. Anyway, I will be available Sunday all day to sell the kit if he's still interested.
"He Who Never Thought Selling A Kit Would Be Such An Ordeal, Especially For Such A Good Price"
"He Who Never Thought Selling A Kit Would Be Such An Ordeal, Especially For Such A Good Price"
#19
Registered User
iTrader: (4)
Join Date: Apr 2005
Location: Rancho Cucamonga, CA
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
Yeah you are not kidding, Was borrowing my Pops pick up. So i can buy the kit, Then the truck starts making a noise and all went down hill from their, Pretty much had to get the truck towed to the shop, Then came to find out that the air went out, So now i have to fix my pops truck so i can take it back to him, Really sorry Mr. Q didnt mean to waste your time.