Anyone know how to install a AUXNISSv3?
I bought a AUXNISSv3, One plug plugs into the stock non bose head unit's CD changer (2004) and it has two other wires,
A. (Yellow) Wire connects to a +12v Source
B. (RED) Wire Connectes to a switched 12v Source
What do i plug these into in the 350z?
Can i splice the factory head unit wires, and if so which ones to i splice?
any help would be great, thanks!!!
auxniss guild
http://www.discountcarstereo.com/pdf/auxniss.pdf
A. (Yellow) Wire connects to a +12v Source
B. (RED) Wire Connectes to a switched 12v Source
What do i plug these into in the 350z?
Can i splice the factory head unit wires, and if so which ones to i splice?
any help would be great, thanks!!!
auxniss guild
http://www.discountcarstereo.com/pdf/auxniss.pdf
Oh sorry, I remember I got your PM about this, but I received so many PM's that day that (Hotchkis sways..lol), that I forgot to answer! But I would be of no help since I didn't install it.
Originally Posted by BhashaZ
Oh sorry, I remember I got your PM about this, but I received so many PM's that day that (Hotchkis sways..lol), that I forgot to answer! But I would be of no help since I didn't install it. 

where did you take it to install and how much did it cost?
Trending Topics
Registered User
iTrader: (9)
Joined: Sep 2005
Posts: 1,436
Likes: 0
From: LBC or In the Hills of Chino
i can help, i installed mine. You need to splice wires off your headunit. Use a light tester or volt meter to find the power and switch wires and jabbing it into the connector that plugs into the stereo. You can test the switch wire by taking your key out of ignition (light test off) and putting the key in (light tester on). Just make sure the power wire is always on (key in or out light test on). I could give you the colors of the wires but it may be different since I have an 05. Once you find the wires, use one of those clamp splicers then tape it up.

Thats pretty much it.

Thats pretty much it.
Last edited by buffmanjeff; May 23, 2007 at 10:06 PM.
Originally Posted by buffmanjeff
i can help, i installed mine. You need to splice wires off your headunit. Use a light tester or volt meter to find the power and switch wires and jabbing it into the connector that plugs into the stereo. You can test the switch wire by taking your key out of ignition (light test off) and putting the key in (light tester on). Just make sure the power wire is always on (key in or out light test on). I could give you the colors of the wires but it may be different since I have an 05. Once you find the wires, use one of those clamp splicers then tape it up.

Thats pretty much it.

Thats pretty much it.
could you tell me what color you plugged yours into?
you have the non bose unit right?
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM





