When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
SPC Camber Kit
After lowering the ride height of your 350Z. Excessive negative camber can actually hurt your traction, tire wear and cornering performance. The complete SPC Pro-Alignment front and rear camber w/rear toe kits replace the limited stock alignment adjustment and let you fine tune the handling and traction characteristics of your car. Now you can set up your ride for any driving scenario, from the street to the strip and anything in between. These kits will NOT fit cars with active steering
Application we stock.
03+350z
09+370Z
Front kit Adjustment range: Camber: -2.5 degrees to +2.5 degrees.
Rear kit Adjustment range: Camber ±4.00 degree Toe ±3.00 degree
Mono-tube shock design
30 levels of damping force
Pillowball mounts and adjustable camber plates included*
Adjustable rear camber plates available
Separate Full length height adjustable
Inverted and Non-Inverted setups
One year warranty
Rebuildable
Technical
Coilovers use 46mm pistons and 53mm shock housings.
Valves are constructed of special spring steel, which outperforms stainless steels and produces longer valve life. Valve stacks use a patented deflective system to provide more precise control.
Patented concave lower locking ring, to prevent unseating
Springs are made of SAE9254 high strength, durable steel. Compression tested at over 500,000 times with less than 5% deformation
T6061 Aluminum utilized in spring locks and seats for high strength and lightweight
Iron lower brackets on MacPherson struts to ensure rigidity
Piston rods are constructed of highly polished steel to lengthen oil seal life and prevent leaking
High pressure inner rod guide seals ensure a perfect fit for consistent fade resistant damping and long shock life.
2 step coating process utilizing nickel and chromium plating to prevent corrosion
Got these in stock ready to ship. Cool tool to add to the tool box or the trunk of your car.
Cusco has just released their new Smart Cross Wrench. Easy to use, extremely portable, yet effective at an affortable cost. The cross shaft becomes one piece, so no more clanking tools in the trunk! Made from long lasting durable material and used by Cusco's professional Rally team.
Size: 12 hex. 17mm , 19mm and 21 mm
Deep and short socket design
measurements: 400mm x 400mm
Weight: 900grams
torque capability: 450nm
material: Chrome molybdenum
Made in Japan
$64.99 shipped to the lower 48 states. Message me if you are International.
SPC Camber correction kits. Package w/BC BR Coilovers!!!
