:::Rebuilt Front Suspension Arms:::
#27
Banned
Thread Starter
iTrader: (6)
Join Date: Oct 2011
Location: South El Monte
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
We're going to start offering these hard rubber washers as an option as well. The idea is that the solid SPL bushing is transferring increased road vibrations to the cabin through the compression arm cone spacers. By adding these to the top and bottom spacers along with machining the spacers themselves and using the SPL o-rings you should be able to eliminate the majority of the road noise / knock you get from these.
The washers are OEM Nissan parts used for a similar purpose
The washers are OEM Nissan parts used for a similar purpose
#29
Registered User
iTrader: (4)
Join Date: May 2007
Location: Vancouver,BC/Point Roberts,WA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Finally, i been waiting for this...
price of Lower Control Arms with SPL &
Radius Arms with SPL Bushings, o-rings, oem hard washers and machining...
shipped to 98281
thanks
price of Lower Control Arms with SPL &
Radius Arms with SPL Bushings, o-rings, oem hard washers and machining...
shipped to 98281
thanks
#33
Banned
Thread Starter
iTrader: (6)
Join Date: Oct 2011
Location: South El Monte
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
those aren't the parts which are machined. The machined pieced are the spacers themselves. These are what your spacers look like compared to the regular SPL spacers.
We also went ahead and got the SPL o-rings which for some reason wernt included with some of the boxes we got, apparently because they were purchased before they began including those hence the slight delay in getting these things shipped.
#35
Banned
Thread Starter
iTrader: (6)
Join Date: Oct 2011
Location: South El Monte
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
you don't need to leave a deposit, but there are a few people already waiting.. the issue is giving people enough time to have the new arms installed and the old ones sent back out to us.
#37
New Member
iTrader: (8)
Just got mine yesterday. Quality is top notch, as expected. Here are some pics of the arms with the bushings in place. With the o-ring in place, there is hardly any noise when you manipulate the bushing. I'll see how they sound when they get installed on the car.
I'm going to have them installed on Thursday and then my cores will be sent back.
Thanks Mike and L-Fab!
I'm going to have them installed on Thursday and then my cores will be sent back.
Thanks Mike and L-Fab!
Last edited by Swiffer; 02-28-2012 at 04:24 AM.