FS: (4) Enkei RPF1 18x10.5-Mag Blue finish!!
#21
New Member
iTrader: (12)
what needs to be done in order to fit the 18x10.5 up front? fendor pull? massive neg camber? I've got a 17x10 +25 and it has less than a finger space between my tire and the shock strut up front. No rubbing on my setup, but it's really really tight fit.
btw I have 275/40 square setup with T2/TCKline combo.
btw I have 275/40 square setup with T2/TCKline combo.
Last edited by cyc5181; 05-22-2012 at 11:31 AM.
#22
Registered User
Thread Starter
iTrader: (4)
Join Date: Aug 2011
Location: Houston
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
what needs to be done in order to fit the 18x10.5 up front? fendor pull? massive neg camber? I've got a 17x10 +25 and it has less than a finger space between my tire and the shock strut up front. No rubbing on my setup, but it's really really tight fit.
btw I have 275/40 square setup with T2/TCKline combo.
btw I have 275/40 square setup with T2/TCKline combo.
You can run these in the front if you have a tire like 245/40/18 or something. You would needs lots of camber also, at the very least -3.5. If you running a 275/40/17 up front right now, you shouldnt have that big of a problem running this wheel. You cant run a big tire though
350zjason350z- tires were 275/40/18 Nitto nt01. They did not rub b/c I only had them in the rear
#23
Sleeps in 350Z
iTrader: (5)
I'm not 100% sure on z fitments yet but i'll take a stab at it.
You can run these in the front if you have a tire like 245/40/18 or something. You would needs lots of camber also, at the very least -3.5. If you running a 275/40/17 up front right now, you shouldnt have that big of a problem running this wheel. You cant run a big tire though
350zjason350z- tires were 275/40/18 Nitto nt01. They did not rub b/c I only had them in the rear
You can run these in the front if you have a tire like 245/40/18 or something. You would needs lots of camber also, at the very least -3.5. If you running a 275/40/17 up front right now, you shouldnt have that big of a problem running this wheel. You cant run a big tire though
350zjason350z- tires were 275/40/18 Nitto nt01. They did not rub b/c I only had them in the rear
I'll be in Houston in a couple weeks and I'm very tempted to snag these if they're still for sale then.
#25
Registered User
Join Date: Mar 2011
Location: houston tx
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
i was running 18x10.5 0 all the way around on my z with a 235/40 in the front and 245/40 in the rear front fenders are rolled with a lil pull and rear fenders are rolled these should fit fine with similar size tires and a roll in the front glws i wish i could buy these for track wheels
#29
Registered User
iTrader: (2)
Join Date: Dec 2009
Location: TEXAS
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
It is a 91 with 208k Previous owner had the motor rebuilt 7k miles ago he said. The car is really clean. I sanded it down for paint, and will have it primered by this weekend. It runs really strong. The transmission is an auto, and the trans has a few issues but other than that the car is REALLY solid and in great shape. The interior is really nice, and the body doesnt have any dings/dents like typical 240's. If you are interested let me know and I can shoot you some pictures. Would make a great drift or daily driver with just a 5spd swap. Clean and clear title.