[DFW]: DFW's Lounge
#5063
Living in 350Z
iTrader: (64)
just did my belts...they were super easy...if anyone needs help doing theirs...I will do it for a case of beer...
no squealing or nothing and used the "feeler" method...LOL...checked the old belts before taking them off, and just tightened the new ones to about the same.. started her up and had no issues.
no squealing or nothing and used the "feeler" method...LOL...checked the old belts before taking them off, and just tightened the new ones to about the same.. started her up and had no issues.
#5065
New Member
iTrader: (41)
just did my belts...they were super easy...if anyone needs help doing theirs...I will do it for a case of beer...
no squealing or nothing and used the "feeler" method...LOL...checked the old belts before taking them off, and just tightened the new ones to about the same.. started her up and had no issues.
no squealing or nothing and used the "feeler" method...LOL...checked the old belts before taking them off, and just tightened the new ones to about the same.. started her up and had no issues.
#5067
Sleeps in 350Z
iTrader: (24)
Join Date: Mar 2007
Location: Flower Mound , TX
Posts: 5,745
Likes: 0
Received 0 Likes
on
0 Posts
What are the speaker sizes for the Z in the rears & doors ?
I'm thinking about getting something just a bit better without spending a bunch of cash. Just want to do a swap out for speakers without running new wires.
#5070
Living in 350Z
iTrader: (64)
thats funny coming from someone with a twin turbo setup...
alright Nexx....next time I need some help with swapping out studs, I will give you a call.. How long did that take you again?
Im kiddin...we'll see if the feeler method works, hopefully I wont have any issues..
alright Nexx....next time I need some help with swapping out studs, I will give you a call.. How long did that take you again?
Im kiddin...we'll see if the feeler method works, hopefully I wont have any issues..
Last edited by AcidJake75; 04-19-2009 at 06:22 AM.
#5071
Sleeps in 350Z
iTrader: (24)
Join Date: Mar 2007
Location: Flower Mound , TX
Posts: 5,745
Likes: 0
Received 0 Likes
on
0 Posts
Also you talking about the rear Sub speaker or the rears in back behind the seats ?
Any case I just want to improve sound without spending too much....I was thinking of getting a new head unit & GPS ....But that is some coin.
Any suggestions ???
#5072
Booooosstt!!
iTrader: (58)
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes
on
0 Posts
I replaced two back speakers when i replaced headunit. I have a base, so no bose here. But it sounds pretty much better and surprised that two stock speakers work well with aftermarket headunit.
Bose are pretty good quality system imo, even stock. If you are going to replace just a speakers, i would say go something better quality speakers than bose. You can try just replace a speakers and then if sounds not that good, replace headunit/GPS
Sorry i don't know much about speakers lol
Bose are pretty good quality system imo, even stock. If you are going to replace just a speakers, i would say go something better quality speakers than bose. You can try just replace a speakers and then if sounds not that good, replace headunit/GPS
Sorry i don't know much about speakers lol
#5074
Registered User
iTrader: (3)
Join Date: Dec 2007
Location: Garland TX
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
I am upset... I had Jotech put in my new clutch a while back when I burned out my old one in ennis... and AGAIN they didnt torque my tranny all the way down, and now because of the turbo, I cant torque it down myself... So I have to get a day where I can go back to Garland and get them to do it...
#5075
Booooosstt!!
iTrader: (58)
Join Date: Mar 2007
Location: Dallas/NewYork/Michigan/Korea
Posts: 5,311
Likes: 0
Received 0 Likes
on
0 Posts
I am upset... I had Jotech put in my new clutch a while back when I burned out my old one in ennis... and AGAIN they didnt torque my tranny all the way down, and now because of the turbo, I cant torque it down myself... So I have to get a day where I can go back to Garland and get them to do it...
Do have a question, how you feel when tranny isn't right torque?
#5076
Jacob: Swapping out wheel studs? It was pretty easy and very fast when I did it. Hardest part for me was taking off the rotor that seemed to be rusted/seized onto my hub.
Chris: If you have stock bose there is a seperate amplifier but it only works for the bose stuff. If you wanted to upgrade the head-unit to a double-din for navi/gps and all that's be a nice idea instead of buying a portable unit? But if you wanted to upgrade speakers you would need to upgrade head-unit + add an amplifier as well.
BTW there are some aftermarket speakers that are made of paper cone as well. It's very popular and there are actually good paper cone speakers,
The rear speaker (not sub) is the ones I speak up. They are useless and not worth buying speakers for. I have mines disabled and only have my aftermarket ones up front doing all the work.
Chris: If you have stock bose there is a seperate amplifier but it only works for the bose stuff. If you wanted to upgrade the head-unit to a double-din for navi/gps and all that's be a nice idea instead of buying a portable unit? But if you wanted to upgrade speakers you would need to upgrade head-unit + add an amplifier as well.
BTW there are some aftermarket speakers that are made of paper cone as well. It's very popular and there are actually good paper cone speakers,
The rear speaker (not sub) is the ones I speak up. They are useless and not worth buying speakers for. I have mines disabled and only have my aftermarket ones up front doing all the work.
#5077
Living in 350Z
iTrader: (64)
Oh I know I was just giving Nexx a hard time cause his wasnt "so easy" lol
and if anyone wants to hear a DAMN good system, sit in Q's car... Im tellin ya, no words... I felt like I was at a concert...I was freakin there man, wanted to break out my lighter and everything..
#5079
New Member
iTrader: (41)
thats funny coming from someone with a twin turbo setup...
alright Nexx....next time I need some help with swapping out studs, I will give you a call.. How long did that take you again?
Im kiddin...we'll see if the feeler method works, hopefully I wont have any issues..
alright Nexx....next time I need some help with swapping out studs, I will give you a call.. How long did that take you again?
Im kiddin...we'll see if the feeler method works, hopefully I wont have any issues..