RGV(Brownsville - Harlingen - Mcallen)
Hey Folks,
Are any of you members of San Antonio's ZSport Club? If not and you wish for information, please PM me w/ your e-mail address and I will forward you the April/May Newsletter,
Stephen
Are any of you members of San Antonio's ZSport Club? If not and you wish for information, please PM me w/ your e-mail address and I will forward you the April/May Newsletter,
Stephen
Sup Fellas,
Project Powerlab is closer to completion.
All I'm pending are spark plugs, uppipes, downpipes, run the lines and install UTEC with all its components. Hopefully I can crank it this weekend. Hope all goes well.
Alex is looking into building the block. We are still trying to figure out if his turbo seals are bad or if its something more serious. We are waiting on our catch can kits to come in to alleviate any crank case pressure. Just trying to trouble shoot.
I'll keep you guys updated.
DRock
Project Powerlab is closer to completion.
All I'm pending are spark plugs, uppipes, downpipes, run the lines and install UTEC with all its components. Hopefully I can crank it this weekend. Hope all goes well.
Alex is looking into building the block. We are still trying to figure out if his turbo seals are bad or if its something more serious. We are waiting on our catch can kits to come in to alleviate any crank case pressure. Just trying to trouble shoot.
I'll keep you guys updated.
DRock
Sup Fellas,
Project Powerlab is closer to completion.
All I'm pending are spark plugs, uppipes, downpipes, run the lines and install UTEC with all its components. Hopefully I can crank it this weekend. Hope all goes well.
Alex is looking into building the block. We are still trying to figure out if his turbo seals are bad or if its something more serious. We are waiting on our catch can kits to come in to alleviate any crank case pressure. Just trying to trouble shoot.
I'll keep you guys updated.
DRock
Project Powerlab is closer to completion.
All I'm pending are spark plugs, uppipes, downpipes, run the lines and install UTEC with all its components. Hopefully I can crank it this weekend. Hope all goes well.
Alex is looking into building the block. We are still trying to figure out if his turbo seals are bad or if its something more serious. We are waiting on our catch can kits to come in to alleviate any crank case pressure. Just trying to trouble shoot.
I'll keep you guys updated.
DRock
LET ME KNOW WHEN YOU WANT ILL EMAIL YOU MY NUMBER.
CANT TODAY CAUSE WE MIGHT GO TO THE TRACK. ROBERT WANTS TO TRY HIS CAR WITH THE NITROUS
. IF I GO ILL LET YOU KNOW WHAT HE RAN. SAM WE NEED TO RECORD THIS . LETTTSSSS GOOOOO.
OHHH YEA ALSO DOES ANYONE HAVE A HELMET WE CAN BORROW CAUSE THE TRACK WONT LET YOU RUN WITHOUT A HELMET IS YOUR RUNNING FASTER THAN 13.9 AND I DONT THINK ROBERT IS GOING TO RUN SLOWER THAN 13.9.
IF ANYONE WANTS TO MEET UP WE ARE LEAVING AT 7 FROM MCALLEN.
CANT TODAY CAUSE WE MIGHT GO TO THE TRACK. ROBERT WANTS TO TRY HIS CAR WITH THE NITROUS
. IF I GO ILL LET YOU KNOW WHAT HE RAN. SAM WE NEED TO RECORD THIS . LETTTSSSS GOOOOO. OHHH YEA ALSO DOES ANYONE HAVE A HELMET WE CAN BORROW CAUSE THE TRACK WONT LET YOU RUN WITHOUT A HELMET IS YOUR RUNNING FASTER THAN 13.9 AND I DONT THINK ROBERT IS GOING TO RUN SLOWER THAN 13.9.
IF ANYONE WANTS TO MEET UP WE ARE LEAVING AT 7 FROM MCALLEN.
sup fellas,
project powerlab is closer to completion.
All i'm pending are spark plugs, uppipes, downpipes, run the lines and install utec with all its components. Hopefully i can crank it this weekend. Hope all goes well.
Alex is looking into building the block. We are still trying to figure out if his turbo seals are bad or if its something more serious. We are waiting on our catch can kits to come in to alleviate any crank case pressure. Just trying to trouble shoot.
I'll keep you guys updated.
Drock
project powerlab is closer to completion.
All i'm pending are spark plugs, uppipes, downpipes, run the lines and install utec with all its components. Hopefully i can crank it this weekend. Hope all goes well.
Alex is looking into building the block. We are still trying to figure out if his turbo seals are bad or if its something more serious. We are waiting on our catch can kits to come in to alleviate any crank case pressure. Just trying to trouble shoot.
I'll keep you guys updated.
Drock
good to hear the project is almost done. Me and robert might go to AUSTIN by the end of this month. He wants to go take his car to get tuned with the nitrous. Let me know dave if you all want to go also and get yours done .
Last edited by DB350Z05; May 6, 2009 at 06:58 AM.
so far ive got a quote for 150
but i dont know if thats with or with out paint or how long it will take
o and since the i want the hood painted why not throw in the eyelids too so it could all match
but im debating whether the hood+eyelids
headlights custom painted
or gtspec braces
Registered User
iTrader: (12)
Joined: Dec 2004
Posts: 2,087
Likes: 0
From: McAllen / San Antonio TX.
i joined the forum a while back but since have forgotten my username/password which makes no sense since i always use the same forum username/password. anyways i met Luis, has a 300zx and a silver 350 which i recently sold my Work rims too, seemed like cool guys...he game me some routes that they take when they go out into the twisties 

Last edited by SRH_G35; May 6, 2009 at 03:27 PM.
Sounds good. Let me see what my finances look like by then. Are you guys planning on taking your Z's to UpRev after all. I need to find out if they can tune with UTECs. Maybe they'll give us a group discount or something. I'll try an give them a call tomorrow.
How was the TRACK by the way?
Sounds good. Let me see what my finances look like by then. Are you guys planning on taking your Z's to UpRev after all. I need to find out if they can tune with UTECs. Maybe they'll give us a group discount or something. I'll try an give them a call tomorrow.
How was the TRACK by the way?
How was the TRACK by the way?
so when are you planning to go to uprev D?





j/k