Originally Posted by Road Warrior

just wondering what your doing here in the forum since thats the goal...to share info. we are not here just to bs....thats why its the technical section.

everyone posts their experiences with products, tuning, etc...for the betterment of the z community and the enthusiasts that participate

Originally Posted by aceman

I dont mind posting mine up. But you all should know this by now. Someone elses Map might do something entirely different with your A/F ratio on your car then what is seen on the owners car.

All cars react different to different mods. So basically it depends on where your car makes power. And to find that out, you need to be on a dyno. I make my power at around 12.5 to 13.0 a/f ratio. Your car might be different.

But the map gives you something to build from. But then again the map that comes with the UTEC gives you something to build from

Later
Aceman

Originally Posted by Road Warrior

just wondering what your doing here in the forum since thats the goal...to share info. we are not here just to bs....thats why its the technical section.

everyone posts their experiences with products, tuning, etc...for the betterment of the z community and the enthusiasts that participate

Originally Posted by mchapman

I will be posting mine up NA and FI when they are complete.

Originally Posted by audiblemayhem

here is an NA map, this is with KnN dropin, skunk2 plenum spacer, test pipes, single exhaust, and pulleys....


enjoy, and feel free to paypal me 20 dollars if you use it and like it

audiblemayhemfl@yahoo.com


timing is advanced 2 degrees and AFR in my car was 12.8 across the board. if you install this map and it is consistently lean or rich, remember it is a percent of MAF value change for the fuel. you can highlight the whole page and add or subtract values accordingly...

This map is for my car and every car is different, use this for a reference and send me some money!!!!!

Originally Posted by 99atlantic

it's one thing to share info, it's another to basically pay a few hundred dollars to get it tuned to my mods then share it freely............I'm not a very generous person as you can tell

Originally Posted by audiblemayhem

here is an NA map, this is with KnN dropin, skunk2 plenum spacer, test pipes, single exhaust, and pulleys....


enjoy, and feel free to paypal me 20 dollars if you use it and like it

audiblemayhemfl@yahoo.com


timing is advanced 2 degrees and AFR in my car was 12.8 across the board. if you install this map and it is consistently lean or rich, remember it is a percent of MAF value change for the fuel. you can highlight the whole page and add or subtract values accordingly...

This map is for my car and every car is different, use this for a reference and send me some money!!!!!

Originally Posted by audiblemayhem

here is an NA map, this is with KnN dropin, skunk2 plenum spacer, test pipes, single exhaust, and pulleys....


enjoy, and feel free to paypal me 20 dollars if you use it and like it

audiblemayhemfl@yahoo.com


timing is advanced 2 degrees and AFR in my car was 12.8 across the board. if you install this map and it is consistently lean or rich, remember it is a percent of MAF value change for the fuel. you can highlight the whole page and add or subtract values accordingly...

This map is for my car and every car is different, use this for a reference and send me some money!!!!!