New UTEC GUI in the works! Need input for features!
Originally Posted by chimmike
that's a good point too, adjusting for load using something other than TPS.......say you're climbing a mountain, you can get into boost much easier without having to floor the throttle, the partial throttle boost can lead to a lean condition, and TPS adjustments to load maps won't make much difference to it.
Dude what are you talking about! You cant change the way the UTEC works within an external GUI.
The way that target a/f works in other programs and the way it pretty much has to work is that you specify the desired target a/f within each cell across the load points similar to the logging display. It gives you an intuitive way to specify what you want and see what you have versus where you want to be.
Sounds like a great idea Ken
Like others have said, the target A/F would be a great feature. And something that is all around more pleasing to the eye, would be nice aswell.
Later
Aceman
Like others have said, the target A/F would be a great feature. And something that is all around more pleasing to the eye, would be nice aswell.
Later
Aceman
Originally Posted by Kenk2
Hey fellas..
I have decided to have a friend of mine write up a nice little GUI interface for the utec/tuner. The software will totally replace Hyperterminal as far as logging and changing values. What I need from everyone who is willing to contribute is to let me know what functions you would like in the program to help make tuning this car easier.
The interface is being written as I type this so the more info, realistic would be nice
the better..
Let the posting begin!
BTW,
Thank You for contributing!
I have decided to have a friend of mine write up a nice little GUI interface for the utec/tuner. The software will totally replace Hyperterminal as far as logging and changing values. What I need from everyone who is willing to contribute is to let me know what functions you would like in the program to help make tuning this car easier.
The interface is being written as I type this so the more info, realistic would be nice
the better.. Let the posting begin!
BTW,
Thank You for contributing!
Originally Posted by aceman
Sounds like a great idea Ken
Like others have said, the target A/F would be a great feature. And something that is all around more pleasing to the eye, would be nice aswell.
Later
Aceman
Like others have said, the target A/F would be a great feature. And something that is all around more pleasing to the eye, would be nice aswell.
Later
Aceman
Basically I would like to do whatever we can do in Hyperterminal, add a few nice little features and like you said, make it more pleasing to the eye.. Not really trying to reinvent the wheel..
Soooo... I'm assuming this is a 3rd party effort, no? Or are you actually with turboxs?
Just curious because I sent an email to turboxs last week inquiring about some features and I was told that all of my requested features were presently planned, but had no ETA due to work on a new GUI.
If this is a 3rd party effort, do you have any interest in moving this to the open-source world?
Just curious because I sent an email to turboxs last week inquiring about some features and I was told that all of my requested features were presently planned, but had no ETA due to work on a new GUI.
If this is a 3rd party effort, do you have any interest in moving this to the open-source world?
Originally Posted by chimmike
TXS is working on a new GUI right now.......
I have also heard that TXS is coming out with their GUI.. I am still working on mine and if SEMA comes and goes and no GUI by TXS, I will go full steam ahead.. Right now its pretty much on the back burner..
Originally Posted by chimmike
The software at the end of the week is firmware, not a new GUI, though Jermaine did mention they ARE working on the GUI as we speak.
There just come a point where Talk becomes Cheap.
Sorry guys but I need results like.... Yesterday. 
I understand everyone wants this pretty much now and it is still in the works.. I did hear that TXS was coming out with their GUI and I put a hold on mine.. Well its back in the works again and will be done, cant tell you when but as soon as I have some beta stuff to send you guys I will pm you and get the ball rolling..
Originally Posted by Kenk2
I understand everyone wants this pretty much now and it is still in the works.. I did hear that TXS was coming out with their GUI and I put a hold on mine.. Well its back in the works again and will be done, cant tell you when but as soon as I have some beta stuff to send you guys I will pm you and get the ball rolling..
Originally Posted by Kenk2
Hey fellas..
I have decided to have a friend of mine write up a nice little GUI interface for the utec/tuner. The software will totally replace Hyperterminal as far as logging and changing values. What I need from everyone who is willing to contribute is to let me know what functions you would like in the program to help make tuning this car easier.
The interface is being written as I type this so the more info, realistic would be nice the better..
Let the posting begin!
BTW,
Thank You for contributing!
I have decided to have a friend of mine write up a nice little GUI interface for the utec/tuner. The software will totally replace Hyperterminal as far as logging and changing values. What I need from everyone who is willing to contribute is to let me know what functions you would like in the program to help make tuning this car easier.
The interface is being written as I type this so the more info, realistic would be nice
the better.. Let the posting begin!
BTW,
Thank You for contributing!
sorry if this has already been mentioned but i did not want to read the whole thread cuz i am a lazy ****
