Another UTEC excel sheet, may be useful
10-12-2006, 01:00 PM
#21
Registered User
Thread Starter
Join Date: Oct 2005
Location: Louisiana, USA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Ya they did. I just need more data points. After you parse the logs out the way I need to for my tests, the data sets get really small with only three or four WOT data logs. 
10-12-2006, 05:37 PM
#25
Professional
iTrader: (7)
Join Date: Jan 2004
Location: Home
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
Hey fellas..
Looking good on the Apps!!! I have been so buried at work lately it is hard for me to get away and do anything.. Smokey.. I sent you some logs, Colin, I am sending you my logs too.. Wanted to chime in here to let you know you guys are great! What you are doing is really cool and lets try to keep the info flowing..
Ken
Looking good on the Apps!!! I have been so buried at work lately it is hard for me to get away and do anything.. Smokey.. I sent you some logs, Colin, I am sending you my logs too.. Wanted to chime in here to let you know you guys are great! What you are doing is really cool and lets try to keep the info flowing..
Ken
10-12-2006, 05:41 PM
#26
Professional
iTrader: (7)
Join Date: Jan 2004
Location: Home
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
I have some logs that are waaay longer bro.. Ones posted here too.. Post #25 Log #16
https://my350z.com/forum/tuning/209504-utec-installed-heres-my-log-2.html
https://my350z.com/forum/tuning/209504-utec-installed-heres-my-log-2.html
Note that when you are adding your own datalog, it must not have more than 110 rows. Anything beyond the 110th row is ignored. (I built this around the longest log I could find, so for now the limit is 110).
Last edited by Kenk2; 10-12-2006 at 05:44 PM.
10-13-2006, 07:24 AM
#28
Registered User
Thread Starter
Join Date: Oct 2005
Location: Louisiana, USA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Updated with a new version using KenK2's super-long log file. This should hold everyone over until we find a way to dynamically update the other tab data series length based on the the last row used in the "Datalog" tab.
The datalog now supports 230 total datalog rows. (not including header, etc.)
The datalog now supports 230 total datalog rows. (not including header, etc.)
Last edited by SmokyTyrz; 10-13-2006 at 07:30 AM.
10-13-2006, 12:16 PM
#29
Professional
iTrader: (7)
Join Date: Jan 2004
Location: Home
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
I haven't d/loaded the latest version yet but are you not able to update the other tabs automatically yet?? I can get that done but what I am running into is that the graphs aren't updating either.. I cant figure that one out..
10-13-2006, 01:07 PM
#30
Registered User
Thread Starter
Join Date: Oct 2005
Location: Louisiana, USA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Ya, BrickydZ showed me how to use the paste link feature. Everything updates automatically but the charts do not update their axis limits as determined by the length (# of rows) in the datalog.
So, replacing rows in the datalog tab with your datalog will cause all the charts to update automatically with the new information.
But if your log is shorter than the template then the resulting charts will have leftover space in them. If your log is longer than the template then you will not see all of your data in the charts.
So we need someone to figure out how to cause the axis limits for each charts' data series to automatically adjust based on the number of total datalog rows.
I think there needs to be a "Load Log" function. Kind of like how TXS's Map Visualizer Excel file works, where you click a button in the sheet and it loads a txt file, parses it, updates all the tabs and data series, and then displays the output.
We'll get there eventually. I hate learning new things in Excel, because I forget them later. :-) I'm hoping we can keep a collaboration process going and just get folks involved who already know how to do this stuff.
Thx!
So, replacing rows in the datalog tab with your datalog will cause all the charts to update automatically with the new information.
But if your log is shorter than the template then the resulting charts will have leftover space in them. If your log is longer than the template then you will not see all of your data in the charts.
So we need someone to figure out how to cause the axis limits for each charts' data series to automatically adjust based on the number of total datalog rows.
I think there needs to be a "Load Log" function. Kind of like how TXS's Map Visualizer Excel file works, where you click a button in the sheet and it loads a txt file, parses it, updates all the tabs and data series, and then displays the output.
We'll get there eventually. I hate learning new things in Excel, because I forget them later. :-) I'm hoping we can keep a collaboration process going and just get folks involved who already know how to do this stuff.
Thx!
10-13-2006, 01:23 PM
#32
Excel training online
http://www.internet4classrooms.com/on-line_excel.htm
http://www.usd.edu/trio/tut/excel/index.html
http://office.microsoft.com/en-ca/as...039151033.aspx
http://www.windmill.co.uk/xlchart.html
Maybe some of these links will help. I dont really ever use excel myself, wife knows it pretty well. But there seems to be alot of info out there online to answer some of your questions.
Hope this helps in some way
Later
Aceman
http://www.internet4classrooms.com/on-line_excel.htm
http://www.usd.edu/trio/tut/excel/index.html
http://office.microsoft.com/en-ca/as...039151033.aspx
http://www.windmill.co.uk/xlchart.html
Maybe some of these links will help. I dont really ever use excel myself, wife knows it pretty well. But there seems to be alot of info out there online to answer some of your questions.
Hope this helps in some way
Later
Aceman
10-13-2006, 02:39 PM
#33
Registered User
iTrader: (16)
Join Date: Nov 2003
Location: cali
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
smokey, check your email for logs...lots of them. let me know if you need corresponding maps too...cuz i have those as well showing changes from each version.
its going to cost you though....i want a free version of your new tool
no more making an example out of me either
its going to cost you though....i want a free version of your new tool
no more making an example out of me either
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
