chris'smax

iTrader: (5)

Will the patch harness work on the 06? I assume there would be a difference between connectors to the ecu and the wire diagrams for the non-revup and revup models becasue of the variable exhaust timming, but i figured i would check with someone before making a conclusion.

Thanks
Chris

THE TECH

iTrader: (154)

Call Autosport?

chris'smax

iTrader: (5)

well on the website they have it listed for all years of the 350z, but for some reason i don't hold to much faith in what they say because i am not sure if they are aware of the changes

THE TECH

iTrader: (154)

Hmm...you'd think since they make the harnesses, they wouldn't just blindly list it for a car that it wouldn't work on. Who knows though.

THE TECH

iTrader: (154)

I just went on their site and I didn't find a list of years at all. It just lists 350Z.

chris'smax

iTrader: (5)

well i have had it happen before. Not that they would intentionally do it, but they might not be aware.

chris'smax

iTrader: (5)

that was my point

THE TECH

iTrader: (154)

That's why I said that you might want to call them and ask.

DaveFunction2ND

iTrader: (8)

Yes the Autosport will work just fine. The pinouts of the '06 are the same the only change is the additional of 4 or 6 wires for the cam phasers on the exhaust side that now use previously unused pins. It is the same connector and everything. The harness does not change the location of any of the pins it is strictly a passthrough unit. As always you need to consult the service manual before attepmting to wire anything to confirm pin configuration.

THE TECH

iTrader: (154)

There ya go.