Will the patch harness work on the 06? I assume there would be a difference between connectors to the ecu and the wire diagrams for the non-revup and revup models becasue of the variable exhaust timming, but i figured i would check with someone before making a conclusion.

Thanks
Chris

 

Call Autosport?

 

well on the website they have it listed for all years of the 350z, but for some reason i don't hold to much faith in what they say because i am not sure if they are aware of the changes

 

Hmm...you'd think since they make the harnesses, they wouldn't just blindly list it for a car that it wouldn't work on. Who knows though.

 

I just went on their site and I didn't find a list of years at all. It just lists 350Z.

 

well i have had it happen before. Not that they would intentionally do it, but they might not be aware.

 

that was my point

 

That's why I said that you might want to call them and ask.

 

Yes the Autosport will work just fine. The pinouts of the '06 are the same the only change is the additional of 4 or 6 wires for the cam phasers on the exhaust side that now use previously unused pins. It is the same connector and everything. The harness does not change the location of any of the pins it is strictly a passthrough unit. As always you need to consult the service manual before attepmting to wire anything to confirm pin configuration.

 

There ya go.