Notices
Tuning Reflashes, Piggybacks, Standalone ECUs

R/T Tuning, Lansdale PA (NYC people are you listening?!

Thread Tools
 
Search this Thread
 
Old Feb 6, 2009 | 03:44 PM
  #21  
BakaN20's Avatar
BakaN20
New Member
iTrader: (26)
 
Joined: Jun 2006
Posts: 1,301
Likes: 23
From: Hamden, CT
Default

Originally Posted by tylerxfire
didn't mean for hostility but i did not ask for that info. is all im saying...it is setup now with rev-up cog configuration with 2.87 pulley on a non-revup...i am gonna need a tune for this along with headers, test pipes, exhaust, plenum spacer etc. few more mods...now there are shops closer that tune utec's is what im saying and i really don't have valuable info. on your product or know anyone who has used it... and like i said def. not looking for a mail in reflash

Did you check out the osiris thread? You don't have to mail out your ecu. With the osiris program, uprev can give you a base tuning through email based on your modifications, then with that, you can flash your ecu, afterwards, you do some runs and log your data through cipher, then send that data to uprev for fine tuning, then they send it back to you through email and you flash your own ecu. Or if you don't want to do it yourself, you can just go to a tuner and they can flash your ecu for you. R/T tuning is in PA so you have an uprev tuner near by.

What osiris does is it changes your target a/f's based on your modifications, it can also limit or increase your rpms, open the throttle body 100%. It really seems like a great alternative to piggybacks or standalones. I plan to get one when I get a chance. Take a read in their thread, its long but worth it.

Here is the thread on osiris:
https://my350z.com/forum/tuning/2795...rom-uprev.html
Reply
Old Feb 6, 2009 | 05:45 PM
  #22  
tylerxfire's Avatar
tylerxfire
Registered User
iTrader: (15)
 
Joined: Jul 2008
Posts: 3,817
Likes: 1
From: new york
Default

yup..PA is nowhere near me, not all of ny is nyc, i am upstate ny, PA is at least 5 hours minimum
Reply
Old Feb 7, 2009 | 06:59 PM
  #23  
__jb's Avatar
__jb
Z + Rear Seat
Premier Member
iTrader: (3)
 
Joined: Jun 2005
Posts: 1,642
Likes: 0
From: St.Pete,FL
Default

Originally Posted by tylerxfire
i ask for info. on your product and you give me somethin about pulley size and built block. . my setup is fine im fully aware of what pulley sizes are gonna be ok and what not...
Rich (UpRev) was just trying to look out for you. He replies to many, many people every day and doesn't know what their technical capabilities are. He's a nice guy.

Originally Posted by tylerxfire
i do not want a reflash where i mail in my ecu, i would be fine with a custom in house tune and a reflash that way which is why i asked but didn't get any info. so basically maybe ill stick with something i know and something i know will get the job done.. i am curious of this software but its just not in my area and i really can't get any usefull info. on it since nobody around here works with it.
UpRev has the ability to do mail in flashes, but Osiris is known for its ability to flash ECU's through the OBD-II port. You buy Osiris, send UpRev a list of your mods... UpRev designs a ROM file for your car with its specific mods... they e-mail the ROM file back to you and you use Osiris to flash it onto your ECU in your own garage, or wherever.

However... UpRev doesn't provide e-mail type tunes for boosted cars. The tuning is too critical. They suggest you either buy Osiris Tuner Pro and tune it yourself, if you have the knowledge, or take it to a Pro Tuner that will tune it on a dyno.

Tuning the OEM ECU with Osiris is a great way to go. You eliminate the ECU and UTEC fighting with each other and get a much smoother tune.
Reply
Old Feb 7, 2009 | 07:39 PM
  #24  
athenG's Avatar
athenG
Registered User
iTrader: (2)
 
Joined: Nov 2005
Posts: 2,252
Likes: 0
From: NYC
Default

Originally Posted by tylerxfire
didn't mean for hostility but i did not ask for that info. is all im saying...it is setup now with rev-up cog configuration with 2.87 pulley on a non-revup...i am gonna need a tune for this along with headers, test pipes, exhaust, plenum spacer etc. few more mods...now there are shops closer that tune utec's is what im saying and i really don't have valuable info. on your product or know anyone who has used it... and like i said def. not looking for a mail in reflash


Originally Posted by 3kgtslflip
Did you check out the osiris thread? You don't have to mail out your ecu. With the osiris program, uprev can give you a base tuning through email based on your modifications, then with that, you can flash your ecu, afterwards, you do some runs and log your data through cipher, then send that data to uprev for fine tuning, then they send it back to you through email and you flash your own ecu. Or if you don't want to do it yourself, you can just go to a tuner and they can flash your ecu for you. R/T tuning is in PA so you have an uprev tuner near by.

What osiris does is it changes your target a/f's based on your modifications, it can also limit or increase your rpms, open the throttle body 100%. It really seems like a great alternative to piggybacks or standalones. I plan to get one when I get a chance. Take a read in their thread, its long but worth it.

Here is the thread on osiris:
https://my350z.com/forum/tuning/2795...rom-uprev.html

/\ That is a very long useless post!!! tylerxfire already mentioned he's going to be using the 2.87 pulley, so in short he has a SC.


This is why your post is useless
\/


Originally Posted by __jb
However... UpRev doesn't provide e-mail type tunes for boosted cars. The tuning is too critical. They suggest you either buy Osiris Tuner Pro and tune it yourself, if you have the knowledge, or take it to a Pro Tuner that will tune it on a dyno.
You need a full tune for boosted car and I mean full tune from scratch!! Uprev dont have (yet) enough FI cars so they dont have base map for every injector size out there... The only way is to tow the car to the tuner, in tylerxfire case tow 5 hours away or driver the car with stock injector and just try to stay away from boost. 5 hours of driving and staying away from boost is hard!!! It takes lots of concentration on the Throttle and rpm!!!








Last edited by athenG; Feb 7, 2009 at 07:47 PM.
Reply
Old Feb 8, 2009 | 03:50 PM
  #25  
BakaN20's Avatar
BakaN20
New Member
iTrader: (26)
 
Joined: Jun 2006
Posts: 1,301
Likes: 23
From: Hamden, CT
Default

Just trying to help, but you learn something new everyday.
Reply
Old Apr 6, 2009 | 07:22 PM
  #26  
ChuckD05's Avatar
ChuckD05
Registered User
iTrader: (1)
 
Joined: Mar 2009
Posts: 125
Likes: 0
From: NY
Default

anyone on here use these guys yet ? I have an appointment Thursday the 9th, I am hoping for some good results!

tune thursday and nismo diff and 3.9s friday...

cant wait
Reply
Old Apr 6, 2009 | 07:31 PM
  #27  
tylerxfire's Avatar
tylerxfire
Registered User
iTrader: (15)
 
Joined: Jul 2008
Posts: 3,817
Likes: 1
From: new york
Default

Originally Posted by ChuckD05
anyone on here use these guys yet ? I have an appointment Thursday the 9th, I am hoping for some good results!

tune thursday and nismo diff and 3.9s friday...

cant wait
nope, let me know how u make out, i went with AAM for my vortech tune
Reply
Old Apr 19, 2009 | 11:48 AM
  #28  
Mr.Squeeze's Avatar
Mr.Squeeze
New Member
iTrader: (12)
 
Joined: Aug 2003
Posts: 249
Likes: 0
From: Bronx N.Y/North N.J
Default

I was there for there dyno day on 4/18 and, will be going back down to R/T Tuning to get a Osiris tune.Once I put on headers test pipes and exhaust.They have a nice shop and it was cool to meet some guys from this forum I wish I had a HR though lol.
Reply
Old Apr 21, 2009 | 04:16 AM
  #29  
joek19522's Avatar
joek19522
Registered User
 
Joined: Apr 2009
Posts: 1
Likes: 0
From: lehigh Valley, PA
Default

Hello everyone! I'm new here, crossing over from G35driver. Shocked to find I missed the dyno day at R/T tuning. I live in the Lehigh Valley so they are really close. Hoping to get my "06 rev up over there for Osiris and a dyno tune soon!
Reply
Old Jun 3, 2009 | 10:23 PM
  #30  
tylerxfire's Avatar
tylerxfire
Registered User
iTrader: (15)
 
Joined: Jul 2008
Posts: 3,817
Likes: 1
From: new york
Default

so....any of u boosted guys go here yet for a tune with osiris??
Reply
Old Jun 4, 2009 | 02:21 PM
  #31  
BenchTT's Avatar
BenchTT
Registered User
iTrader: (2)
 
Joined: Oct 2005
Posts: 119
Likes: 0
From: Atlantic City
Default

Originally Posted by tylerxfire
so....any of u boosted guys go here yet for a tune with osiris??
They have done an HR with greddy TT using osiris. I have been there a handfull of times and at the dyno day Vince verified he had a base map for my HR. I went back and he did a good job tuning it.
Reply
Old Jun 13, 2009 | 05:26 AM
  #32  
grey00lustre's Avatar
grey00lustre
Registered User
iTrader: (8)
 
Joined: Dec 2007
Posts: 331
Likes: 0
From: G-boro, NJ
Default

Anybody know what's the cost RT Tuning charge to reflash ecu with Osiris? Looking to get ecu tune on my 04. Any dyno results yet?
Reply
Old Jun 13, 2009 | 10:31 AM
  #33  
BenchTT's Avatar
BenchTT
Registered User
iTrader: (2)
 
Joined: Oct 2005
Posts: 119
Likes: 0
From: Atlantic City
Default

Not sure. I got 5whp and 4trq and it cost about 925 including cipher cable.

Good bang for the buck... uh NO

But I needed it since my a/f were scary lean and I run above 5k rpm often.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2ndchanceZ
Engine
1
Oct 26, 2015 08:03 PM
nanotech
Exhaust
6
Oct 2, 2015 05:02 AM
KOF
Tuning
5
Sep 30, 2015 04:09 AM




All times are GMT -8. The time now is 09:40 AM.