Map for Greddy ultimate needed desperately:

For any set up with twin turbo will do. I want to start all over.

My problem car run fine at .4 bar and any time boost is exceeded the car will develop abrupt cut + hesitation and RPM will be limited to 2500. At that stage CEL will also appear. Only if battery is discounted it will go to original condition until .4 bar is exceeded.

My setup Greddy twin turbo, fuel lines + regulator upgrade + pump, ported heads, pistons, rods, and alum flywheel/HD clutch. Still running 440 injectors.

Thank you in advance.

 

i have a map on my emanage fo a vortech with 6 psi if you want it tell me how to send it to ou..

 

pm sent

 

thank you for the help.
My e-mail is gtrjapan@gmail.com

I solved the cut problem above 4000 by changing the boost limiter cut setting and locked it to 4.70.

However car feels as if something is holding it back untill above 5500 RPM. Fuel is 90% from 4000. A/F ratio reading .85.

I hope you can send me maps to comapre.


Thank you