hey guys ive got a few question about the utec, that im confused on...
i drive an 06 altima se-r, with your basic bolt ons and meth injection (intake,HF cats,y-pipe,pulleys,spacers and vias BOP)
i planned on tuning with utec BUT everywhere i search i come up with different answers...
so i was wondering you guys could lend some assistance!

these questions pertain to my alti not a 350z!!!
what else do you need besides a utec? i heard something about only being able to use certain widebands with it and stuff?
and also i need to order a 350z utec with a harness to make it plug and play?
idk maybe you guys could shed some light plz?

 

You should probably post this on an Altima forum...??

I have alot of experience with tuning the UTEC but as far as I know the 350Z UTEC only works on 350Z/G35.

 

i have lol...
its kinda dead around there, but anywhere heres what im getting from them..

some people say i need a 350z utec and some kind of harness to make it plug and plag, while others say the 350z utec its already plug and play
and i need the utec tuner to use as a wideband...
while others tell me i can use an aem uego and a utec!!

i guess i need to know is if i can use a aem uego with my utec.?
i already ordered the utec..and i did need the 350z utec...if i need some harness ill order that next!
but any way do i need a certain wideband? i just dont need something i wont use lol!

 

No wideband other than the tuner from turboxs will integrate with the UTEC, and only during tuning (you stick it in the tailpipe while on the dyno, ect). Any other wideband will 'work' but just won't show up in the UTEC logs -- you'll have to monitor it separately.

I'm guessing you'll need a harness adapter for your car, I doubt the 350z and Altima use the same ECU.

 

from what im reading its just plug and play, IF we order the 350z one...
IF WE DONT we need some kinda harness, i guess...
finally got ahold of a decent guy on the alti forums whos helping...hes also running it, so it helps!

djamps: when you said it wont be in utec logs? you mean like data logging?

and monitoring any other wideband would be like real time monitoring??
like the aem uego with a gauge mounted, for real time monitoring? it just wont data log with the utec?

 

The turboxs tuner wideband connects direct to the UTEC and the A/F is merged with the UTEC logs. It aids greatly in tuning, so you can see RPM, Boost, A/F all in the same log.

The AEM or any other non TurboXS wideband will operate separate... you would have to go on visual only, ect. No logs...