VIDEO INSIDE: My 350ZTT by IMV Films
#61
Registered User
Join Date: Jan 2003
Location: Orlando, FL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
The EVO hung in pretty good on the first run, but has no top end like the Z (more likely due to stk DP and cat-back). It also did well in first gear in the other runs, but he screwed up 2nd (Z would've pulled up top anyways).
The Z sounds really nice. Video was well made too.
Would've been nice to see the Z run against an EVO with more mods.
The Z sounds really nice. Video was well made too.
Would've been nice to see the Z run against an EVO with more mods.
#62
Charter Member #34
Thread Starter
Join Date: May 2002
Location: -
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 99AllTurbo
The EVO hung in pretty good on the first run, but has no top end like the Z (more likely due to stk DP and cat-back). It also did well in first gear in the other runs, but he screwed up 2nd (Z would've pulled up top anyways).
The Z sounds really nice. Video was well made too.
Would've been nice to see the Z run against an EVO with more mods.
The EVO hung in pretty good on the first run, but has no top end like the Z (more likely due to stk DP and cat-back). It also did well in first gear in the other runs, but he screwed up 2nd (Z would've pulled up top anyways).
The Z sounds really nice. Video was well made too.
Would've been nice to see the Z run against an EVO with more mods.
thanks for the comments!
#64
hmmmm
I have tryed every link and every time i get a picture and a "retard" in big letters..whats up with this? any working link i can get the vid. from, I REALLY want to see this
#65
Charter Member #34
Thread Starter
Join Date: May 2002
Location: -
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
try this one... (click on it, dont copy/paste or anything)..
the server it is on, checks the reference site... only this site (And a few others) can bring it up
http://www.350ztt.com/skidazzle/videos/index2.htm
should bring you to a page when you can right-click, save as...
m
the server it is on, checks the reference site... only this site (And a few others) can bring it up
http://www.350ztt.com/skidazzle/videos/index2.htm
should bring you to a page when you can right-click, save as...
m
#68
Registered User
Join Date: Jul 2003
Location: Allen, TX
Posts: 3,407
Likes: 0
Received 0 Likes
on
0 Posts
I am not impressed at all. The video quality is amazing though. I hope our cars arent that slow. He has 3 mods and prolly spent a tenth of what you spent on your car and you can only pull 2 cars?
Maybe the vid doesnt do you justice. We should race (or find a stock 350Z) hehe and you should make a video of that.
Maybe the vid doesnt do you justice. We should race (or find a stock 350Z) hehe and you should make a video of that.
#69
I would have liked to see SkiDazzle's 350z vs that Indian guy's (the one that talks so much) Eagle Talon. It would have done more justice. Haha. I didnt know it would be come such a popular video otherwise we would have worked on it a bit more. Come back down soon, we can work something out during the day.
Rasa
Something else on the IMV Films DVD
Rasa
Something else on the IMV Films DVD
#73
Registered User
iTrader: (5)
Join Date: Jan 2003
Location: Shelby Twp, Michigan
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
SKiDaZZLe,
What gauges are you using? They look great. I just purchased a Greddy TT kit and am having it installed next week with the e-01 boost controller. I'd like to get those gauges installed also. Install is being done in the Detroit area where my car has been sitting in the garage for the winter Anyway, do you have any suggestions/tips regarding the Greddy kit? I've heard that Greddy intends to introduce a Stage II kit in the near future that includes some internal mods and new heads. It's probably best and safest to keep the kit right around the suggested psi until some other engine mods (and the stage up) are made I suppose. Thanks in advance.
SYG
What gauges are you using? They look great. I just purchased a Greddy TT kit and am having it installed next week with the e-01 boost controller. I'd like to get those gauges installed also. Install is being done in the Detroit area where my car has been sitting in the garage for the winter Anyway, do you have any suggestions/tips regarding the Greddy kit? I've heard that Greddy intends to introduce a Stage II kit in the near future that includes some internal mods and new heads. It's probably best and safest to keep the kit right around the suggested psi until some other engine mods (and the stage up) are made I suppose. Thanks in advance.
SYG
#75
Originally posted by VehicularLunacy
There is a link to the video on the IMV Films forum.
There is a link to the video on the IMV Films forum.
#76
Charter Member #34
Thread Starter
Join Date: May 2002
Location: -
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by carfever
were on the web site is it? I checked the trailers and there were two short clips and neather one was it...
were on the web site is it? I checked the trailers and there were two short clips and neather one was it...
#77
Guest
Posts: n/a
Re: video
Originally posted by carfever
Think you could get the surver back on so watch so i can get a peek of this vid...? Thanks for your help
Think you could get the surver back on so watch so i can get a peek of this vid...? Thanks for your help
If you're copying/pasting the link or using a download accelerator type of program, then yeah, you won't get it. Everyone else is getting it though... so no offense but the problem **just might be** on your end.