Greddy+UPREV+HR=Amazing
Thread Starter
Vendor - Former Vendor
iTrader: (7)
Joined: Jun 2009
Posts: 505
Likes: 1
From: Lansdale, PA
Greddy+UPREV+HR=Amazing
Hey guys, just wanted to post this up, we finished it a lil while ago but never got around to posting about it. Greddy Tuner kit that we tuned on UPREV for a customer at 6lbs, and then a few months later came back and wanted to run 10lbs.
Pic after Alignment fresh from the Body Shop
All of this was done with a Greddy Turbo Ti-C Exhaust with the 1 3/4 in silencers left in!!!!! The cust wanted it to be quiet and have power so the tune took a lil extra work to make smooth. If you notice the power that drops off at higher RPM, that is the effect of the silencers. With them out I would assume we would be at 525whp pretty easily
All this with great idle, smooth starting and passing PA Emissions without a hitch
Dyno @6lbs compared to @10lbs
Pic after Alignment fresh from the Body Shop
All of this was done with a Greddy Turbo Ti-C Exhaust with the 1 3/4 in silencers left in!!!!! The cust wanted it to be quiet and have power so the tune took a lil extra work to make smooth. If you notice the power that drops off at higher RPM, that is the effect of the silencers. With them out I would assume we would be at 525whp pretty easily
All this with great idle, smooth starting and passing PA Emissions without a hitchDyno @6lbs compared to @10lbs
Last edited by Vince@R/TTuning; Aug 15, 2011 at 01:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
