Notices
VQ35HR Mods and Support related to the 2007/08 High Revving VQ

2008 Nismo stutter at 2500 rpm

Old May 11, 2014 | 03:24 PM
  #1  
Nismo#1184's Avatar
Nismo#1184
Thread Starter
Registered User
 
Joined: Jul 2013
Posts: 5
Likes: 0
From: Midwest
Default 2008 Nismo stutter at 2500 rpm

Hey all, i am having a problem and could really use some help. At around 2500 rpm or at 10% throttle im having a moderate stutter issue with the car. It is only throwing one code, and that is for the cruise control switch. Does fine under half, full, or no load. Any ideas on what this could be? I also noticed the tac sticks at 2000 rpm for about a tenth of a second when returning to idle. I am about to have it in the shop for a new clutch setup, and would love to be able to tell them what to fix for the stutter issue. Any help is much appreciated. Have a great day!
Reply
Old May 11, 2014 | 03:59 PM
  #2  
Bmurray350z's Avatar
Bmurray350z
New Member
10 Year Member
iTrader: (34)
 
Joined: May 2011
Posts: 8,075
Likes: 92
From: Burlington, NC
Default

any mods? tune?
Reply
Old May 11, 2014 | 04:07 PM
  #3  
Nismo#1184's Avatar
Nismo#1184
Thread Starter
Registered User
 
Joined: Jul 2013
Posts: 5
Likes: 0
From: Midwest
Default

No completely stock, sorry should have said that. it just turned 30,000 miles.
Reply
Old May 11, 2014 | 04:12 PM
  #4  
Bmurray350z's Avatar
Bmurray350z
New Member
10 Year Member
iTrader: (34)
 
Joined: May 2011
Posts: 8,075
Likes: 92
From: Burlington, NC
Default

Hmmm. I had a similar stutter but it was just a few spots in my tune that had to be worked out a little better. Not sure man, hope you figure it out though!
Reply
Old May 11, 2014 | 04:41 PM
  #5  
Lakeside's Avatar
Lakeside
Registered User
iTrader: (5)
 
Joined: Nov 2007
Posts: 1,537
Likes: 0
From: Clifton Park, NY
Default

Only stutter I ever had was due to intake pipes clamps had loosened around throttle bodies. Check all your clamps. Could be a lot of things. Sensor issue of some sort. Goto Autozone or someplace and scan it. See what SES/CEL you have.
Reply
Old May 11, 2014 | 06:24 PM
  #6  
Italianjoe1's Avatar
Italianjoe1
New Member
iTrader: (6)
 
Joined: Dec 2008
Posts: 1,607
Likes: 14
From: Miami, FL
Default

Yeah that sounds like a small air leak issue or something similar.

Quick question, what oil is in the car and how fresh is it? I had an issue with a Z using heavier oil that had a funny VVT issue until it warmed up, went away when we went back to a regular weight oil. Only showed up at very light throttle like you said and it wasn't much of an issue but it was there.
Reply
Old May 12, 2014 | 02:56 PM
  #7  
Nismo#1184's Avatar
Nismo#1184
Thread Starter
Registered User
 
Joined: Jul 2013
Posts: 5
Likes: 0
From: Midwest
Default

Just had oil changed, used 5w30 synthetic. Checked all hoses, no vacuum leaks. Still only throwing cruise control switch code. But cruise still works on my car. It looks like its more throttle position than rpm as i can get it in multiple gears at dif rpm but always at 10% throttle. Its getting a new clutch wed so ill have them take a look at it. Will inform you all after problem is diagnosed. And another ? Gonna put a cluthmaster FX 350 clutch and flywheel in my car. All ive heard is good but anyone with any first hand xp on it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM
Stevo Z
SoCal Marketplace
4
Oct 3, 2015 09:14 PM
nanotech
Exhaust
6
Oct 2, 2015 05:02 AM
Alexreyes
2003-2009 Nissan 350Z
13
Sep 30, 2015 11:30 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:39 PM.