we are taking the 20s off of one Z for te3718s

 

20's on the 350, 19's on the 2+2, 18's on the TT

 

i just got my z yesterday and it has 19 inch wheels, and i think they look great. i can not give you a driving impression as there is a ton of snow going on at the moment.

 

Does anyone know what offsets are best for 20" that will be as flush as possible without rubbing, requre fender rolling, or messing with any other clearances (e.g. turning radius, etc.)?

Thanks in advance.

 

 

 

 

My wheel specs

Volk GTC's Gunmetal
(front) 20x8.5 +26 245/35/20 Nitto
(rear) 20x10.5 +22 275/30/20 Nitto
Tanabe GF210's

 

what are you dropped on?

 

Done! on Tannabe GF210s

 

Depends on tire size and brand, wheel width, camber and toes settings and ride height, basically, if you want the best offset, its a gamble and you'll have to adjust something as the clearances will be tight at best

 

I have 20x8.5 front and 20x10 rear. +25 offset. I notice that many of you are running 245/35 & 285/30. Do any of you have problems with the VDC? I would prefer not to run 30 in the front to avoid bending the rim. I wanted to run Toyo T1R's. Will I have problems with this setup? Thanks

 

Dutchboy, what are those wheel/tire specs, those are hawt!! I'm definitely going with something like that, maybe with a little less of a lip though.

 

20x9.5,10.5

 

What amount of wheel drop u running?

 

Well, then its a good thing you did not pay for them.

 

Check out my sig for the info ... offsets are 38mm in the front 37mm in the back. I plan on getting atleast 10mm spacers all around. Here's another recent pic.

 

20mm spacers added in the back. Fenders are rolled No rubbing.

 

here is mine got it 2 weeks ago

 

heres mine
20" ADR Sterlings