i have 19x10+0 19x11+0
what will be pefect tire combination ?

 

That's going to depend on your fender modification, alignment specs, ride height, etc.

 

im currently at stock height and just plan on rolling my fenders
in the future i plan on lowering it 2"

 

Pretty aggressive for a stock Z... Those will basically stick out an inch further than these do.





This car is lowered on coilovers as well.

 

do you think a 235/35 front
and 265/30 bakwillfit ok?

 

I have a 2003 base 350z with stock 17" rims i was looking at 19" staggered rims which are 8.5" in the front and 9.5" in the back will those fit without making adjustments

 

Depends on the offset

 

Merged and quoted where you should start your research

 

Vehicle is lowered on Eibach sportlines also have front/rear Camber kits and toe bolts.

If i run 255/35R19-235/35/19. Do you think i will rub with no Fender Work?

Any input will help.



Thank you.

 

Why run that aggressive of a setup and not have fenders rolled?

You will need work considering you will probably try to run the stretched look won't you so just get it done anyway.

 

Wow I totally missed this.

If you want 235 front and 265 rear I would probably stick to a 35 profile front and rear. You can mount those widths on the wheel but they'll be slightly stretched.

 

Im getting new tires. 19x9.5-1 up front with a 10mm spacer clear caliper and 19x11+8 in the rear. I was going to go with 245 /35 and 285/35 rear. is that reasonable??

 

Ah....so new wheels and deciding tires? Anything fits, it's more a matter of how you want it to fit...

What's your suspension setup/ride height?

What are your goals for this setup ...i.e...DD/hellaflush DD

 

ya ... all depends on your "stance"

 

Better do some fender work with those wheel and tire specs.

 

well I have rears rolled already and I did test fit them,they do stick out lol. I been searching and I seen some cars 350z/g35 with these offsets and it seems just fine. I just wish I didn't have to use a spacer up front. over all im not really trying to be slammed to floor, im on kw suspension now wit spc rears arms btw.

 

im just concern on tire size... i would like to have the same stretch on all four

 

how far do the rims stick out from the fender? a 285 on a 11" wide rim is not much of a stretch if you need it stretched much to clear your fenders...

 

Agreed. 285 is not really stretched at all. My guess is probably a 245-255, but it totally depends on your alignment, fender work, tire brand, model, etc.

 

stick out about 2inches