Volk gt-c locks, lugs , where ??
#2
Registered User
Join Date: Oct 2002
Location: Hawaii
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Try to call MacKin directly.
Mackin Industries, Inc.
9921 Jordan Circle
Santa Fe Springs, CA 90670
562.946.6820 Tel
You will need to ask if you can buy all of the locks from them. If you buy the Rays lug nut set...you will have only 4, one for each tire. Also, you do realize that you will have to carry like 5 different locks...and if you loose just one.....you are a little screwed right??????
Mackin Industries, Inc.
9921 Jordan Circle
Santa Fe Springs, CA 90670
562.946.6820 Tel
You will need to ask if you can buy all of the locks from them. If you buy the Rays lug nut set...you will have only 4, one for each tire. Also, you do realize that you will have to carry like 5 different locks...and if you loose just one.....you are a little screwed right??????
#5
Registered User
Join Date: Oct 2002
Location: Hawaii
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Well....okay I guess that will work.
I think that you should be able to purchase those locks from Mackin...but it might be an arm and a leg. Another option would be to get another version of car locks.
Opps...just noticed that you posted what I was thinking. Anyhow...look at this site:
http://performancenissanparts.com/ca...roducts_id=317
Click on the picture to enlarge and the product shows the McGuards at
M12 X 1.25. Though they mention that it was for GT LM4's....but the studs for the locks should be the same as you dont normally replace those just because you got aftermarket wheels.
M12 x 1.25 13/16" Black 25354 This one from that McGuard site might be the one to get according to the description:
Cone Seat-Tuner Click for matching Lug Nuts
For use on "Tuner" style wheels or wheels with small diameter, close tolerance lug holes.
I think that you should be able to purchase those locks from Mackin...but it might be an arm and a leg. Another option would be to get another version of car locks.
Opps...just noticed that you posted what I was thinking. Anyhow...look at this site:
http://performancenissanparts.com/ca...roducts_id=317
Click on the picture to enlarge and the product shows the McGuards at
M12 X 1.25. Though they mention that it was for GT LM4's....but the studs for the locks should be the same as you dont normally replace those just because you got aftermarket wheels.
M12 x 1.25 13/16" Black 25354 This one from that McGuard site might be the one to get according to the description:
Cone Seat-Tuner Click for matching Lug Nuts
For use on "Tuner" style wheels or wheels with small diameter, close tolerance lug holes.
Last edited by XLR8SN; 06-01-2005 at 01:39 PM.
#6
Registered User
Join Date: Jun 2004
Location: Vancouver, BC
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
Join Date: Jun 2004
Location: Vancouver, BC
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I got mine from Steve at Evolution Motorsports, he knows what you need and service was excellent. Cost about $50 IIRC.
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
Tonyz_2004_350z
South East Marketplace
1
10-04-2015 12:53 PM