fitment of Work Meister S2 18x9 +35's
fitment of Work Meister S2 18x9 +35's
Looking at a set of Work Meister S2 18x9 +35's all around. Would that look ok on the Z? Sorry for the newb question, I did a search but couldn't find any info.
That would look pretty boring and stockish...
I would run at least a 10.0 +10 in the rear to get max lip. That's in a High pad wheel, low pad you can go much more aggressive.
I run the Meister 3-piece in a 18x9 +5 up front and 18x10 -7 rear. Just to show you how much more you can fit
This setup requires stretched tires (265/35/18) and about 2.5 deg negative camber in the rear with completely flattend/rolled fenders.
Fronts are fine up to a 245/40/18 tire.
I would run at least a 10.0 +10 in the rear to get max lip. That's in a High pad wheel, low pad you can go much more aggressive.
I run the Meister 3-piece in a 18x9 +5 up front and 18x10 -7 rear. Just to show you how much more you can fit
This setup requires stretched tires (265/35/18) and about 2.5 deg negative camber in the rear with completely flattend/rolled fenders.
Fronts are fine up to a 245/40/18 tire.
Originally Posted by 03Z33
I run the Meister 3-piece in a 18x9 +5 up front and 18x10 -7 rear. Just to show you how much more you can fit
This setup requires stretched tires (265/35/18) and about 2.5 deg negative camber in the rear with completely flattend/rolled fenders.
Fronts are fine up to a 245/40/18 tire.
Thread
Thread Starter
Forum
Replies
Last Post
Importhookup.com
Vendor Classifieds - Archive
9
Aug 30, 2004 05:19 AM
