Based on my research recommended wheel size 4 the z is 19x9F, 19x10.5R
or 20x9F, 20x10.5R (correct me if am wrong)
can any1 tell me what would happen if u go 20x8.5 all around?????
Does width have to be no less than 9 in the front and more than 10 in the back......?
Any pics or feedback greatly appreciated.
PR Z

 

it would just look rediculous... bottom line

 

+1^ I would definately go wider out back, at least 9''

 

8' wide dubs all the way around would probibly NOT be advisable... But you dont have to follow the convention of wider in the rear either...

Here is a good read on running a Z with the same width tire all around....

http://www.sportcompactcarweb.com/tech/0404scc_350z/

 

General, the same size wheels and tires are not recommended. Reason being is that it may drive VDC crazy. However; since you drive the Enthusiast, its OK. TCS doesn't mind.

 

Point 1: Please learn to type better, I had a hard time reading that.
Point 2: That would look completely stupid. Let me guess, you want huge heavy chromies? To each his own, but don't do the car halfassed, 20x8.5 in the front is ok, but on the rear, NO.

 

mdracer helpful article