>>>>>>>Volk Owners Only<<<<<<<<
not a problem, here it is -
350z rockin' gram lights 8.5 +22 (front) 9.5 +22 (rear) and rubbers are 245s (front) 275s (rear) nitto nt555
cobra rockin' volk te37s 9.5 +22 (front) 10.5 +22 (rear) and rubbers are 275s (front) 305s (rear) nitto invo
350z rockin' gram lights 8.5 +22 (front) 9.5 +22 (rear) and rubbers are 245s (front) 275s (rear) nitto nt555
cobra rockin' volk te37s 9.5 +22 (front) 10.5 +22 (rear) and rubbers are 275s (front) 305s (rear) nitto invo
I got a little stain on my bronz te37's
seems like it was some dirty gunk water or something that built up in the lug nut wells.
cant seems to make the stian go away off the rims.
tried good gone, soap and water. should i try magic earser?
any pointers to get this off?
by touch.. you cant feel the stain.. just see..
seems like it was some dirty gunk water or something that built up in the lug nut wells.
cant seems to make the stian go away off the rims.
tried good gone, soap and water. should i try magic earser?
any pointers to get this off?
by touch.. you cant feel the stain.. just see..
Got a question for guys with +12 offset: Can you run 19x10.5 +12 with 285/35/19 with just a fender roll, or is pulling the fender required? I'm lowered on Hotchkis springs (mild drop) with negative camber on the edge of OEM specs, and have CE28's in 19x9.5 and 19x10.5 +22 all around, 255/35 and 285/35. I would like to add 10mm spacers front and rear to poke the wheels out a bit. Rear fenders are already rolled but I want to make sure I will still have clearance when I add the 10mm spacer. Any help will be appreciated...thanks!
Got a question for guys with +12 offset: Can you run 19x10.5 +12 with 285/35/19 with just a fender roll, or is pulling the fender required? I'm lowered on Hotchkis springs (mild drop) with negative camber on the edge of OEM specs, and have CE28's in 19x9.5 and 19x10.5 +22 all around, 255/35 and 285/35. I would like to add 10mm spacers front and rear to poke the wheels out a bit. Rear fenders are already rolled but I want to make sure I will still have clearance when I add the 10mm spacer. Any help will be appreciated...thanks!
Got a question for guys with +12 offset: Can you run 19x10.5 +12 with 285/35/19 with just a fender roll, or is pulling the fender required? I'm lowered on Hotchkis springs (mild drop) with negative camber on the edge of OEM specs, and have CE28's in 19x9.5 and 19x10.5 +22 all around, 255/35 and 285/35. I would like to add 10mm spacers front and rear to poke the wheels out a bit. Rear fenders are already rolled but I want to make sure I will still have clearance when I add the 10mm spacer. Any help will be appreciated...thanks!
When i had tanabe gf210 drop, i didn't rub with 285/35/19 with a 12 offset with fenders rolled. hope that helps.






