>>>>>>>Volk Owners Only<<<<<<<<
#1461
Registered User
iTrader: (4)
Join Date: May 2007
Location: TEMPE(ASU) ARIZONA
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
So I just picked up a set of 19" SF-Challenges in gunmetal and BF KDW's in 245/35 and 275/35 for my silverstone Z. I am running Tien S-Tech springs right now, is this going to be enough of a drop? Most of you guys are dropped pretty low...I just don't want a gap in the wheelwell, I want it filled!
And yes you will have some gappage still
#1462
Registered User
iTrader: (5)
Join Date: Jan 2008
Location: Austin
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Thats what I was afraid of and kind of expected. I had 20's on the Z before and there was almost no gap, so going an inch smaller, I figure there will be an inch of a gap with the Volks. I'll have to wait to get them to be sure though!
#1469
Registered User
iTrader: (5)
Join Date: Oct 2004
Location: On dicks
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
^^ looking good tony!!!^^
finally i have some pics of my wheels. The car has been in and out of the shop for the past 7 months doing my motor build.
Here they are:
RE30's in formula silver 19x10f 12mm offsett, 19x11 15mm offsett
I am using a 10mm spacer on the front and rear to get these offsetts.
finally i have some pics of my wheels. The car has been in and out of the shop for the past 7 months doing my motor build.
Here they are:
RE30's in formula silver 19x10f 12mm offsett, 19x11 15mm offsett
I am using a 10mm spacer on the front and rear to get these offsetts.
#1470
Sponsor
Performance Nissan
Performance Nissan
iTrader: (92)
Join Date: Dec 2004
Location: Pasadena/Bay Area
Posts: 6,151
Likes: 0
Received 0 Likes
on
0 Posts
^^ looking good tony!!!^^
finally i have some pics of my wheels. The car has been in and out of the shop for the past 7 months doing my motor build.
Here they are:
RE30's in formula silver 19x10f 12mm offsett, 19x11 15mm offsett
I am using a 10mm spacer on the front and rear to get these offsetts.
finally i have some pics of my wheels. The car has been in and out of the shop for the past 7 months doing my motor build.
Here they are:
RE30's in formula silver 19x10f 12mm offsett, 19x11 15mm offsett
I am using a 10mm spacer on the front and rear to get these offsetts.
#1478
Registered User
iTrader: (5)
Join Date: Jan 2008
Location: Austin
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Took a few cell pics, here ya go..
19" Volk SF-Challenge in gunmetal
<br>
Back when I first bought the car and was broke, I didn't have money for mods so I went with free or almost free, and one of those was painting my calipers red. They came out looking pretty good, but I'm not so sure I should leave them with the Volks on there now. What do you guys think? If I keep them red, should I get some red lugnuts?
19" Volk SF-Challenge in gunmetal
<br>
Back when I first bought the car and was broke, I didn't have money for mods so I went with free or almost free, and one of those was painting my calipers red. They came out looking pretty good, but I'm not so sure I should leave them with the Volks on there now. What do you guys think? If I keep them red, should I get some red lugnuts?
#1480
Registered User
iTrader: (5)
Join Date: Jan 2008
Location: Austin
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Yeah thats what I was thinking...I just needed someone elses opinion on it. Eventually I am going to upgrade to either the Brembo brakes, or spring for a BBK I haven't decided yet.