vdc/tsc
12-02-2006, 02:20 AM
#1
New Member
Thread Starter
iTrader: (9)
Join Date: Apr 2004
Location: Los Angeles
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
vdc/tsc
Guys,
I have done some readings but just making sure.
If I get the right tire profiles (245/35/19, 275/35/19) I won't have any problems with it?
I am planning to lower using the s teins springs too.
Tony
I have done some readings but just making sure.
If I get the right tire profiles (245/35/19, 275/35/19) I won't have any problems with it?
I am planning to lower using the s teins springs too.
Tony
12-02-2006, 02:42 AM
#2
New Member
iTrader: (37)
Join Date: Nov 2006
Location: Dallas, TX
Posts: 6,482
Likes: 0
Received 0 Likes
on
0 Posts
You'll be fine...no worries...I think around 65% of Z/G owner run that application. It is even suggested by Volks and Stillen as the proper fitment for plus sizing.
12-02-2006, 03:23 PM
#3
I just ran each in a tire size calculator. Your speedo error % are as follows:
Front: 0.8% fast
Rear: 0.4% fast
This is a perfect setup, assuming the widths are where you want them. It will not upset VDC. The tire calculator I used is here:
http://www.miata.net/garage/tirecalc.html
Edit: I used 225/45/18 and 245/45/18 as the stock tire sizes.
Front: 0.8% fast
Rear: 0.4% fast
This is a perfect setup, assuming the widths are where you want them. It will not upset VDC. The tire calculator I used is here:
http://www.miata.net/garage/tirecalc.html
Edit: I used 225/45/18 and 245/45/18 as the stock tire sizes.
Last edited by guitman32; 12-02-2006 at 03:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
