Does anyonw know how to place the TPS stems on Work Wheels? Ive heard of something called "banding" on this site, but I cannot find a way or procedure to actually "band".

 

I want to say that they work perfectly, not banding needed, you can just "bolt them on" like stock...i could be wrong though.

edit...https://my350z.com/forum/showthread....ister+tps+tpms

So i might be right.

 

For Fix-It-Yourself information check the Fix-It-Yourself forum.

 

Fix-It-Yourself??? Don't you mean Do-It-Yourself?



miester350 - try this thread...
https://my350z.com/forum/brakes-and-suspension-diy/186197-how-to-make-your-own-aps-tire-bands.html

 

I tried the banding my TPS on my S1s and my car cant pick up the signal from them. Nissan reflashed the sensors but still no luck.

Since the valve stem holes on the rim is slightly to small for the TPS valve stem, I was thinking about going to a wheel shop to get the hole enlarged. Any thoughts on this? Should I do it or will it totally compromise the integrity of the rim?

 

The key word is YOURSELF.

 

Banding will definitely work on the S1 wheels.