View Poll Results: Offset
30mm
14
15.56%
25mm
33
36.67%
20mm
43
47.78%
Voters: 90. You may not vote on this poll
Which rota setup should I get?
#21
+25 is really looking nice on supratt's car/I want to get 295 in the back or at least 285. supratt do you have pics without the spacers? I have 10mm spacers now i can use in the back.
#24
you can do a 285 tire with a 20+ offset. I got 20 offset with my Works with a 275 tire and I want to get 5mm spacers. The wider the better. Whoever would do 30+ don't know **** about offset and the Z.
#26
Originally Posted by solidsnake
+25 seems to be the way to go but i like the way they look when they stick out the fender. how big a tire can i fit on the 9.5 +25?
#27
Originally Posted by solidsnake
supratt do you have pics without the spacers? I have 10mm spacers now i can use in the back.
#28
yeah those look nice. I decided to go with the +30 9.5 all around and with 275/35 front and 295/35 rear. I think itll turn out nice. Ill post pics as soon as I get them. Thanks guys.
#30
Originally Posted by solidsnake
I already have a 10mm spacer that I might just put in the rear to make it stick out a little. Its a little tucked in the rear but not too bad.
#37
Originally Posted by 97supratt
Nizan - It's a blitz wing.
350Zenophile - I run 265/35/18F 275/35/18R on falken azenis.
350Zenophile - I run 265/35/18F 275/35/18R on falken azenis.
#38
whats up solid snake this is mark i did alot of research on the offset and what i understand is that +20 all the way around on a 9.5 inch wheel will bring it exactly to the fenders and will look real good. also a +20 on the front and +25 on the rear will look real good i just got some rims with those dimensions and they look sick and of course if you go with a wider rim then 9.5 then the offset change so if you plan on going with 9.5 inch you have those 2 good choices.
#39
http://www.subydude.com/osc/product_...e2641430e56b08
They have the black with red lip in a 20mm offset
They have the black with red lip in a 20mm offset