Enkei RPO3 18/10 + 22 front and rear! Will they fit?
#1
Registered User
Thread Starter
iTrader: (6)
Join Date: Dec 2006
Location: Jacksonville, FL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Enkei RPO3 18/10 + 22 front and rear! Will they fit?
Hey, im looking to get a set of Enkei RP03 in 18 by 10 at all four corners. they come with a 22 offset.
Has anybody ran this setup before with 265/35/18 tires in front and 275/35/18 in the back, or something similar?
Im only worried about the fronts, because in the rear I should't have a problem.
Does anybody know if the Enkei RP03 in this size will fit over the front Brembo brakes of a track edition?
Thanx for your help!
Has anybody ran this setup before with 265/35/18 tires in front and 275/35/18 in the back, or something similar?
Im only worried about the fronts, because in the rear I should't have a problem.
Does anybody know if the Enkei RP03 in this size will fit over the front Brembo brakes of a track edition?
Thanx for your help!
#2
Registered User
iTrader: (2)
Use a offset calculator to compare your current wheels to the new wheels. With the new dimensions, check the car with a tape. Do you clear the suspension, brakes calipers and fenders? Reference: http://www.1010tires.com/WheelOffsetCalculator.asp
#3
Registered User
Join Date: Aug 2003
Location: Illinois
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I have the 18's staggered on my G w/ brembos 18/9 +18 F, 18/10 +22 R
I would be a little concerned on the fronts as well
the 18x9 +18 are all the way out to the edge in front. I think the 18/10 +22 would stick out past the wheelwell
I would be a little concerned on the fronts as well
the 18x9 +18 are all the way out to the edge in front. I think the 18/10 +22 would stick out past the wheelwell
#4
Registered User
iTrader: (4)
Join Date: Jan 2005
Location: ORL, FL
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
I have 18x10.5+15 all around with a 265/35/18 all around.
https://my350z.com/forum/showthread....highlight=rpf1
https://my350z.com/forum/showthread....highlight=rpf1
#6
Registered User
Thread Starter
iTrader: (6)
Join Date: Dec 2006
Location: Jacksonville, FL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Thanx for the reply guys, by my calculations it should fit, but it looks pretty close. I think I'll take my chances and get the Enkei Rp03 in 18/10 +22 all around.
Davidv thanx for the offset calculator - thats awesome.
You guys with 18/10.5 upfront, how much camber are you running?
Davidv thanx for the offset calculator - thats awesome.
You guys with 18/10.5 upfront, how much camber are you running?
Thread
Thread Starter
Forum
Replies
Last Post
350Z Project X
Suspension
9
10-10-2015 09:23 AM