Project Kic Spacer Issues.
Thread Starter
Finally some go
iTrader: (5)
Joined: Jun 2006
Posts: 6,940
Likes: 3
From: Santa Barbara, CA
Originally Posted by blaukal
I have Kics spacers, and checked for space on the back of my rims due to this:
from their sale thread: https://my350z.com/forum/newreply.ph...eply&p=2855935
I would add that I had to retorque the rims after driving on them for a couple weeks -- they shook loose (even with hubcentric rings).
from their sale thread: https://my350z.com/forum/newreply.ph...eply&p=2855935
I would add that I had to retorque the rims after driving on them for a couple weeks -- they shook loose (even with hubcentric rings).
Originally Posted by dutchboy350Z
Just a word of advice. You're suppose to retorque your wheels after about 25 miles of driving. I torqued mine at 90 lbs of torque and plan on doing it again in a couple of days.
Thread Starter
Finally some go
iTrader: (5)
Joined: Jun 2006
Posts: 6,940
Likes: 3
From: Santa Barbara, CA
Originally Posted by blaukal
I hear ya -- I always check them after a couple days, but these spacers are the first time I've ever had the lugs loosen up.
Registered User
Joined: Jul 2005
Posts: 47
Likes: 0
From: Victoria BC Canada
lesson learned. Check the back of your wheels to see if there are pockets first. Otherwise you will need longer studs with slip on spacers.
I cut the stock studs on my car for 11mm custom bolt on spacers.
I cut the stock studs on my car for 11mm custom bolt on spacers.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM
