We love to play guessing games. I say that the wheel is 10 inches wide. Any other guesses?

 

i posted the pic cause u dont see many zs with 315s on. and although my rims are stock they ve been actually widened to 10.5 from 8.5. i was goign to post actual pics of it, but with all the dumb comments i decided not to. and i can launch at 4k with that bold tire and get traction, for u guys wondering how it feels.

 

kosta post up the rest of the pics

 

Damn I was 1/2 inch off my guess.

 

Okay makes sense to me but just post pictures. Why do you care if they flame? You're not doing it to impress anyone are you?

 

Why does everyone have to Hate????

 

Cause they are wondering why they are getting ****ty times on their 19s.
im doing this cause im boosting my car again, the first time i had 19s and man did that suck, it was horrible. this time im gonna be using an 18 inch rim with a 315 drag radial. i posted for ppl to see and maybe do the same that dont have traction.






they will be powdercoated after im done with the fitting

 

gotcha... kinda threw me because the thread title and first sentence both use the word "stock"...

i think some VERY important information was left out...hence the reason for all of the questions and supposed "hating"...

 

I'm going to look for your posts on what this ended up doing to your times...i wouldn't powder those

 

how much did it cost you to get your wheels widened? is it safe? whats the offset?

 

i dont see why it wouldnt be safe 1000 hp supra and vettes do it all the time. the total cost was around 600 that includes shippign both ways to the shop

 

Keep us posted!!

 

Hey Kostat, nice thinking out of the box. I saw a Supra once with the stock TT wheels in chrome with 315's on the back and have always remembered how aggressive it looked from behind.

Show us some detail to the rim, what it looks like from the face of the wheel looking in. I want to see how those weld marks show up. Who did the work for you, contact info? And can you take a shot from the rear with a little better light? I have never seen a good clean shot of 315's on a Z. Maybe take it from 20 feet away so we can get a look at the proportion.

Good work.

 

Those are the onyl pics i have for now. i will take some later. thanks everyone. the rims where done by www.WELDCRAFTWHEELS.com and in addition i have a 15mm spacer but im switching to a 20-25 would make for better fitment

 

very nice im iterested in doing my 03 trackwheels

 

how much wider did you go?

 

Those D/R's are as bald as mine..I run a 295/35/18x10 at the track and hook like a MFer. 15psi seems to be just right for me to get good traction.. Not so good for the drive home though if its raining..

 

Is this a set-up for drag racing? Maybe we will see some times posted here: https://my350z.com/forum/drag/233840-top-25-1-4-mile-times-for-tt-st-supercharger-nitrous-bolt-ons-stock.html.

 

i will prolly run this set up at the track, with new tires though, when imdone with my car, right now i have a greddy kti and fmic kit but im thinking about selling it.

 

I would just leave the ones you have on for the track...bald is better