350zlicious

I really want to run 10.5 in the rear but want to know what rim/tire/offset combo people are using. Also if any "work" that needed to be done to make it happen. Thanks in advance!

N74DV

I've done LOTS of research regarding offsets during the past 4 weeks. I am running 9.5" wide rear +25mm with 285/35/19 now. I have an Eibach drop and I have no rubbing issues at all.

with a 10.5 wheel in the rear you'll be safe with a 35-40mm offset and 295's.

350zlicious

Thanks for the reply! So a 10.5 Volk TE with 22mm offset will rub without modification? Any more experience out there?

N74DV

I would suspect that a 10.5 with 22mm will require fender rolling.... even then it may stick out too far.

10.5 with +22 mm puts the outside edge of the wheel about 5" from the wheel mounting surface.

4.8" or so is about where the fender is.... I'd really suggest a larger offset... something in the mid to upper 30's

the 22mm offset would be fine for a 9.5" wheel.

MATIX

You can run 10.5" in the rear with +22 offset with no rubbing as long as you roll your fender.