Need some quick help, i need to get some spacers for my 07 Z that is running the Rays allows with 225/45 front and 245/45 rear tyres. I'm dropping it to about the lowest setting on a set of Tein FLex, what size of spacers are best front and rear that will give no rubbing issues?

Thanks

Colin

 

Thanks for your help guys, went and bought 25mm for the rear and the wheels catch on the arches.

 

It wasn't possible to help without the wheels offsets.

edit : Just noted that you were mentioning the 05+ rays wheels. I think a lot of people have run 25mm spacers with these wheels and didn't have rubbing issues.

 

im getting my 25mm's in this week, and im running 18x9 +22 in the rear. hope it doesnt rub.

 

No one can make that call better than you. You are looking at the car. I am not. How much room do you have to move the wheels? 10mm? 20mm?

 

i had about an inch. i measured. i just hope mine wont rub when i correct the camber

 

I've got the Rays that come on the 2007 UK spec. They are 8.5" on the back and +33 offset. They just catch and no more with a neg 1 camber on the rear. I'm going to go with 20mm all round.