PV350Z

iTrader: (6)

im from lake jackson....i go to school in prairie view...

foreignsoda

iTrader: (2)

hmm.. do not need +0 for flush.

my +22 is flush as can be and i don't lose tread on the ground due to camber.

looks cool, but isn't practical for me/performance.

keep the pics coming. i enjoy them.

quakerroatmeal

iTrader: (9)

Well my friend said his slip light is still going crazy.

I checked his tires with the calculator and supposely they're

2.97% off on the front
3.4% off on the rear

Stretched on 225/35/19 and 245/35/19

I checked other tire sizes that people run such as 215/35/19 and it's off even more.

lol +22 is not flush. I don't even consider my +10 flush. I guess it depends on the width of the wheel as well. But my 19x10 +10 is not that flush for me.

jimpactmfsc

iTrader: (5)

im bout to join this thread soon,random question for u guys if you would be so kind to answer,will -2.5 camber kill my tires really fast? just curious is all. toe is fine,ill be on 19x9.5 +15 / 19x10.5 +11

Big_C

iTrader: (4)

Well yeah if you have hardly any camber in the rear. My old set up was 19x10.5 +22 with 295.30.19 dropped on Skunk2 springs and I had a tad over an inch of room between the tire and fender. I was not running any type of camber kit.

MrToeknee

iTrader: (20)

My name is Tony and I have a problem... I love to be aggressive!

Wow I finally made it to this thread! Just trying to represent for New Orleans. Even on these crappy roads, we too can ride mean.

My specs are

20x9.5 +7
20x10.5 +0

You gonna drop your Z before our next car show Ryan?!

BTW - Thanks to Gerb for taking the pictures.

ryanmac516

iTrader: (12)

i might actually drop it tommorow since i am off and i wanna try something in the front also. i might cut the lip off the front fenders so i can run less camber in the front

Royal_T

iTrader: (9)

Tony,

Just Siiiiick man. Always love looking at your ride. We need more pics of that beast..lol..

Also what do you have under the hood

Thermal1

iTrader: (23)

Nope. That is a fine amount of camber. Just make sure your toe is in spec and your tires will be fine.

jimpactmfsc

iTrader: (5)

thanks

andrew16639

whats the size of your tires?

JonnyB504

iTrader: (4)

Carefulllll....its not gunna crack the whole thing?

Vortech

resauto

iTrader: (2)

20x9.5 -8
20x10.5 -5
SOLD


20.9.5 -12
20x11 +1
sold


19x9.5 0offset
19x11 0 offset
sold

HXS

iTrader: (18)

^ i see you didn't renew your membership to the secret offset society

resauto

iTrader: (2)

yea.....I come out of the woodworks every once in a while gotta represent Tx proper......and Louisiana the new wheels should be here soon....wider, sportier, nd cleaner then ever!

Royal_T

iTrader: (9)

Resauto,
Loved all your setups..doing it big for the south.

Can't wait for the new setup, and teaser pics

fatboy.yoshi

iTrader: (6)

rob rob rob...yo come out and play in texas

resauto

iTrader: (2)

hopefully in a week or so....If my wheels ever get finished .....I think imma order General Exclaim UHP.....they run a lil thicker right fatboy?

SkullZ

Hey guys, I'm going to be running the setup:

19 9.5/10.5
+17/+15
255/35/19 and 285/35/19 dropped on the Eibach Prokit's, camber kit in the rear and Tokico shocks.

Will a basic fender roll be good enough for this setup? No pulling or extreme roll required? Any suggestions as to what offsets I can go to while still retaining normal drivability and tire wear (i.e. not needing a stretch or drastic camber)?

Thanks.

BLUby_U

iTrader: (9)

skull that wont be too aggressive nor stretch. maybe a minor frnder roll but i would recommend to get 255 rear w 15mil spacers and 235 front w a 10 or 15 mil.

Our vision on this thread is to get the offset as close to zero as possible and stretched tires