Gnosis GS2's? They look nice. What are the rim/tire specs?

 

any help would be appreciated.
im thinking of running a 245/40/19, its a 9.5 wheel with 0 offset (25mm spacer) but im thinkin of going up to a 35mm spacer to make it a -10
im lowered on tanabe gf210's and i took a half inch out of the rear spring mount, ill be getting coils in a couple months and also will be painting the lips of the wheels chrome black.
the wheels are nothing special but i paid 100 for em so i couldnt pass that up since im rockin painted stockers right now.... but any suggestions will be appreciated
thanks

-Joey

 

royal get those things mounted already, I'm dying of anticipation

 

My suggestion would be to sell those things, cause I would not run 35mm spacers no way..

and deftoneZ I will soon just need to get some things painted first before I mount

 

get what mounted? royal did you get new wheels??

 

Yes sir, I bought these wheels off of status.

19x9.5 -3 225/35
19x10.5 -8 245/35

 

I would sell if i could afford better wheels, but money is tight right now. im sure i could play arouind with the camber after they are mounted to get it where it should sit flush

 

Yea bro,, got two sets of wheels. Where have you been. go a couple of pages back to see my test fit of my Weds..

I feel you about money, but you want to do things right the first time. Just save money until you find a aggressive set. They are always on Zilvia any where from 1400-2000. Just take your time

 

yea i know i gotta take my time but im gettin anxious haha, thanks for the input royal. ill start lookin around on zilvia

 

Actually if he adjusted some of that camber there wouldn't be a need for such a big spacer... I say run a 50mm though, lol.

 

i think im going to go the cheap route and buy these for my drift spares


18x10 + 20

i talked to the ebay rep and said i can get 4 18x10 wheels shipped for 600

they fit decent and are dirt cheap, perfect for drifting
they are kinda heavy tho, 23 lbs per rims but hey my works weight almost that much

after some 235/40r18's and a spacer it really wont be that bad

 

haha havnt kept up with the thread lately.. those are goin to look beuatiful once there all on.


really wish i lived in the south so i could get the 'hella flush' look

 

Check out xxr 521's.

 

Glad you finally posted pics in here... glad you like them! They look great on your car.

 

Who did you say was sellin these wheels? these are an exact replicas of american racing ar105's or sb105's please give me contact info to this person and what website hes operating from

 

If he found them on ebay I'm sure you can too

 

yea its on ebay, there easy to find, just scearch "18x10 wheels". they sell em 18x9 and 18x10, but i emailed them from ebay and asked for 18x10 all around

 

^^ ebay Boss 338s. They look the same, but they come in 18x9.5 -4 offset.

The possible downside is: It appears that those 18x10s might fit factory TPMS, but I think the 338s wouldn't. It looks like the stem is straight up in the pics I see of the 338s, but those wheels you posted have a angled stem hole.

 

Here are a few pics. They're not all that great but ill have some good ones once my surprise parts come in the mail and I do a couple of photo shoots. I know im not as low as some of you guys but u gotta realize i live in orlando lol and my side skirts r low as sh*t. Im gonna change the kit up and hopefully once I do that I can go a bit lower. Anyways enough talking on with the pics.

 

hey zboss, does your front get a bunch of rock chips?? i have the vertex kit but took it off due to SO MUCH chips in the front bumper.. i need to get it repainted now...