yes the fronts are all the way down, and so are the rears with the rubber bump mod and i removed one of the rear latching rings on the coil it self to get another .25 of an inch... every bit helps... i would prefer stances because they go allot lower in the rear but since my sides are super low there is no point at least for me to go any lower, they scrape everywhere as is..

 

if these are +12 as someone posted then you have a really rare wheel i would like to add. need more stretch of the tire and of coarse a huge drop to clear up that area, i can sleep in there. judging by the photos the car is new so yo get some leeway for now.

get that thing dropped and keep us updated. if you wanted to really be gangster... get some 10mm spacers on all 4.

 

yes they r +12s all around. im rollin on 245 and 275. just have springs on (gf210s) i would love some coils but funds r tight right now hahaha.

 

 

Pretty aggressive and pretty stretched...wish i had the guts to run some of the setups you guys have got...great work everyone!

 

siiick, now get rid of that wiper!

 

^ i've been hearing that a lot lately LOL...and thanks!

 

so let me see.
if 19 x 11 -5 offset fits, than,
19 x 9.5 -43 will fit too?

1.5 inch = 38mm + 5 = 43.

 

i think it would be...19x9.5-24

 

yeah i calculated a little off...

 

19x10s in the front with 245/35's 10.5 in back with 275/30s

 

^^ looks good! What offsets?

 

Those are not even close to flush...

 

+24 in the front +30 in the back imma get spacers for the back though want them to stick out more

 

thread said stretched tires also. i understand i need to bring out the rears more

 

+1 ebay wiper delete kit ftw!

 

19x9.5 and 19x10.5 +12 all around. I'm planning to add 5mm to the rear so it could stick out for hella flush.

 

9.5 with -3 in the front. hardly any rubbing so i can squeeze more spacers.

 

looks good man. What size spacer in front?

 

thanks! it is a 15mm spacer. tried a 20mm but i could barely turn without further pulling more of the fender.