When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After this pic i went ahead and lowered the front and the rear an inch more where i maxed out the rear on the passenger side but its not low enough for me. I ran with a problem where my right passenger side coil is maxed out and i cant go lowered anymore but the driver side still has enough room to go even lower. So i went ahead and maxed it all out in the passenger side all the way to the bottom and once it stopped, I released pressure off the springs but it only lower it maybe half inch more. All I can think off its getting rid of a collar or two so I can try to loosen up the springs some more. Please chime in on this if you guys got any advice?
Last edited by litoflow; 06-01-2010 at 01:45 PM.
Reason: change fonts :P
^^I know haha, you should see the rest of the rolling shot he took and at the parking lot. I will post them up later on. Maybe in the thread of "My Angry Frog" i created :P
Phiooz - Thanks for at least trying to help bro. I think i will try to remove one or two collars and see where that takes me.
i think your lowering it the wrong way if you do have stance GR+ true style. Are you lowering it by spinning the collars down lowering the preload? Your suppose to remove the bottom half and spin the whole base of the coilover up. I did this and it didnt give me enough drop even with the preload all the way down.
06-01-2010, 01:43 PM
